Did you google linux circuit simulation software Also linux circuit design software Here is a whole list for you: http://ngspice.sourceforge.net/spices.html I think there are some even on the Raspberry Pi installs, I just gutted one to use as a DVR monitor or I would go in and see what was in there.
I think that if you look you will find a whole lot, a lot of the AMSAT stuff and SDR stuff has been done on Linux using Linux tools so it is out there On Thu, Mar 21, 2019 at 5:18 PM Roderick Anderson <[email protected]> wrote: > I'm looking into circuit design and simulation ... for the sub-novice > and lazy person. > > I've had one electronic technician class circa 1978, one circuits class > circa 1982 and almost no experience in the field. > > Now I'm interested in playing around with some circuits I've run across > for amateur (HAM) radio fun. Building is fine but understanding how > they work and what might happen if they are enhanced/modified is my goal. > > I've seen several posts on this list from people that probably know > which end of the iron is hot. So I'm hoping for some suggestions on > software for the causal user. > Before I put in a pile of time installing and trying each I'm asking > for experiences here. > > What I'm looking/hoping for is a GUI based; drop parts in connect > them then run a simulator to see what is happening. I have ng-Spice > installed but I still need to chose a GUI front end. > > For those that might still be interested I have two circuits for doing > MCW (Modulated CW). One is so old the text on the sheet and components > in the circuit is done with a typewriter. :-) The other uses a 555 > timer and actually has photos of the build process. > > Despite my interest in how they work we will probably still build them > as projects so Technicians and above can use their HT radios to practice > Code locally. > > > And that went places most probably aren't interested in but makes me > feel better about asking. :-) > > > TIA, > Rod > -- > KAYSEVENZEDBAKEREASY > > _______________________________________________ > PLUG mailing list > [email protected] > http://lists.pdxlinux.org/mailman/listinfo/plug > -- Chuck Hast -- KP4DJT -- I can do all things through Christ which strengtheneth me. Ph 4:13 KJV Todo lo puedo en Cristo que me fortalece. Fil 4:13 RVR1960 _______________________________________________ PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
