I've installed FC5 on several machines since last week, and my desktop
at home is the biggest problem I've had so far.
I have a 200GB drive that mounts just fine in OpenSUSE 10 and fc4, but
in fc5 I get:
[EMAIL PROTECTED] ~]$ sudo mount /mnt/video/
mount: /dev/hdc1 is not a valid block device
from /etc/fstab:
/dev/hdc1 /mnt/video ext3 defaults 0 0
from dmesg:
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0x8800-0x8807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x8808-0x880f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide1...
hdc: Maxtor 6B200P0, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
hdc: max request size: 512KiB
hdc: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(133)
hdc: cache flushes supported
hdc: hdc1
and:
[EMAIL PROTECTED] ~]$ sudo /sbin/fdisk -l /dev/hdc
Disk /dev/hdc: 203.9 GB, 203928109056 bytes
255 heads, 63 sectors/track, 24792 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hdc1 * 1 24792 199141708+ 83 Linux
For I while I was getting errors from smartd:
Apr 2 04:28:00 scooby smartd[4864]: Device: /dev/hdc, 1 Currently unreadable
(pending) sectors
Apr 2 04:28:00 scooby smartd[4864]: Device: /dev/hdc, 2 Offline uncorrectable
sectors
But I went through the "Bad Sector HOWTO", and I'm not getting errors
any more, and smartctl says:
[EMAIL PROTECTED] ~]# smartctl -l selftest /dev/hdc
smartctl version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 10964 -
# 2 Extended offline Completed without error 00% 10962 -
and:
[EMAIL PROTECTED] ~]# smartctl -A /dev/hdc | grep Sector
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always
- 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline
- 0
I've powered down and re-booted with smartd disabled, and I still
can't get the thing to mount. Any ideas?
Oh yeah, the vanilla FC5 kernel (2.6.15-1.2054_FC5), the corresponding
Xen0 kernel, and the openVZ kernel (2.6.16-026test005.1) all do the
same thing. I'm stumped.
Thanks,
Barry
/*
PLUG: http://plug.org, #utah on irc.freenode.net
Unsubscribe: http://plug.org/mailman/options/plug
Don't fear the penguin.
*/
