The hardware Asus motherboard with with bios assisted raid controler two SATA drives one PATA drive for backup
I want to setup the two SATA drives as RAID 0 and use the motherboards controller to assist if possible. I'm installing FC6.
The first time I installed I just went with the system default setup. It put /boot on the PATA drive and then created a logical volume out of the two SATA drives. This seemed to work except there was no indication anywhere that it was setup as RAID 0 or that it was using the raid I setup in the BIOS.
After hosing the system from a few id10t errors I reinstalled and this time I setup the volumes manually and created a RAID 0 out of the two SATA drives during the install. It works but I swear it runs slower although I have no empirical data to prove it.
Does anyone have experience with setting up RAID 0 with BIOS assisted controller? Am I doing something wrong and what should I look for?
Thanks Brian
smime.p7s
Description: S/MIME Cryptographic Signature
/* PLUG: http://plug.org, #utah on irc.freenode.net Unsubscribe: http://plug.org/mailman/options/plug Don't fear the penguin. */
