I just replaced a Xerox Phaser 6180MFP/D. It started giving an error and wouldn't boot up, I went through the repair manual troubleshooting it, tested all the internal connections and what-not, and everything checked-out to the point where the manual essentially said "replace PCB-A, if that doesn't fix it replace PCB-B. When I checked a couple weeks ago, each were about $100 on Ebay. So hopefully a $100 fix, potentially a $200 fix.
It's been a good printer for us. Not the prettiest for printing pictures, but it's been great for documents. I'm no printer expert so I couldn't tell you how it stacks-up against others, just that we've used it for a couple years and haven't had complaints except that when one toner ran out we couldn't print or even *scan* anything. I bought it used at DI, replaced the fuser, it's been great ever since; we bought a couple toners for it, IIRC Magenta is running low. It's all yours if you want it. Thanks, Eric F. Olsen 801-709-1336 /* PLUG: http://plug.org, #utah on irc.freenode.net Unsubscribe: http://plug.org/mailman/options/plug Don't fear the penguin. */
