[ 0.635952] kvm [1]: IPA Size Limit: 44 bits [ 0.636437] kvm [1]: vgic interrupt IRQ9 [ 0.636567] kvm [1]: Hyp mode initialized successfully [ 0.637540] Initialise system trusted keyrings [ 0.637710] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.640343] zbud: loaded [ 0.641069] FS-Cache: Netfs 'nfs' registered for caching [ 0.641362] NFS: Registering the id_resolver key type [ 0.641381] Key type id_resolver registered [ 0.641385] Key type id_legacy registered [ 0.641433] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.641438] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.641930] Key type asymmetric registered [ 0.641936] Asymmetric key parser 'x509' registered [ 0.641959] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.642077] io scheduler mq-deadline registered [ 0.642082] io scheduler kyber registered [ 0.644010] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 0.644023] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 0.644050] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 0.644084] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x01ffffffff -> 0x0400000000 [ 0.709140] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 0.709295] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 0.709304] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.709311] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 0.709351] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 0.709458] pci 0000:00:00.0: PME# supported from D0 D3hot [ 0.711054] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 0.711212] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.711487] pci 0000:01:00.0: PME# supported from D0 D3hot [ 0.724385] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 0.724395] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 0.724413] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.724422] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 0.724715] bcm2708_fb soc:fb: FB found 1 display(s) [ 0.727260] Console: switching to colour frame buffer device 100x30 [ 0.727977] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 800x480 [ 0.730107] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 0.731294] iproc-rng200 fe104000.rng: hwrng registered [ 0.731444] vc-mem: phys_addr:0x00000000 mem_base=0x3f000000 mem_size:0x3f600000(1014 MiB) [ 0.731959] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 0.732117] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.736859] brd: module loaded [ 0.742770] loop: module loaded [ 0.743597] Loading iSCSI transport class v2.0-870. [ 0.744961] libphy: Fixed MDIO Bus: probed [ 0.745613] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 0.755102] libphy: bcmgenet MII bus: probed [ 0.807139] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 0.807655] usbcore: registered new interface driver r8152 [ 0.807686] usbcore: registered new interface driver lan78xx [ 0.807707] usbcore: registered new interface driver smsc95xx [ 0.853335] pci 0000:00:00.0: enabling device (0000 -> 0002) [ 0.853449] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.853464] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 0.853833] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890 [ 0.854360] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.854369] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 0.854378] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 0.854569] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 0.854575] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.854581] usb usb1: Product: xHCI Host Controller [ 0.854586] usb usb1: Manufacturer: Linux 5.10.77-pcpCore-v8 xhci-hcd [ 0.854591] usb usb1: SerialNumber: 0000:01:00.0 [ 0.854909] hub 1-0:1.0: USB hub found [ 0.854936] hub 1-0:1.0: 1 port detected [ 0.855365] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 0.855371] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.855376] usb usb2: Product: xHCI Host Controller [ 0.855381] usb usb2: Manufacturer: Linux 5.10.77-pcpCore-v8 xhci-hcd [ 0.855386] usb usb2: SerialNumber: 0000:01:00.0 [ 0.855650] hub 2-0:1.0: USB hub found [ 0.855678] hub 2-0:1.0: 4 ports detected [ 0.856309] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.856419] dwc_otg: FIQ enabled [ 0.856423] dwc_otg: NAK holdoff enabled [ 0.856427] dwc_otg: FIQ split-transaction FSM enabled [ 0.856433] Module dwc_common_port init [ 0.856659] usbcore: registered new interface driver uas [ 0.856696] usbcore: registered new interface driver usb-storage [ 0.856793] mousedev: PS/2 mouse device common for all mice [ 0.857624] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.858948] sdhci: Secure Digital Host Controller Interface driver [ 0.858954] sdhci: Copyright(c) Pierre Ossman [ 0.859194] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.861274] ledtrig-cpu: registered to indicate activity on CPUs [ 0.861414] hid: raw HID events driver (C) Jiri Kosina [ 0.861483] usbcore: registered new interface driver usbhid [ 0.861487] usbhid: USB HID core driver [ 0.861634] ashmem: initialized [ 0.864382] Initializing XFRM netlink socket [ 0.864402] NET: Registered protocol family 17 [ 0.864464] Key type dns_resolver registered [ 0.864699] registered taskstats version 1 [ 0.864712] Loading compiled-in X.509 certificates [ 0.864937] Key type ._fscrypt registered [ 0.864943] Key type .fscrypt registered [ 0.864947] Key type fscrypt-provisioning registered [ 0.869788] uart-pl011 fe201000.serial: there is not valid maps for state default [ 0.869900] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 0.869952] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 21, base_baud = 0) is a PL011 rev2 [ 0.874239] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 0.876077] of_cfs_init [ 0.876146] of_cfs_init: OK [ 0.911769] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [ 0.915639] Freeing unused kernel memory: 3648K [ 0.915726] Run /init as init process [ 0.915731] with arguments: [ 0.915735] /init [ 0.915739] nortc [ 0.915743] noembed [ 0.915747] noswap [ 0.915750] with environment: [ 0.915754] HOME=/ [ 0.915758] TERM=linux [ 0.915762] host=Outside [ 0.915765] tz=PST8PDT,M3.2.0,M11.1.0 [ 0.915769] waitusb=2 [ 1.008670] mmc0: new ultra high speed DDR50 SDXC card at address 59b4 [ 1.009343] mmcblk0: mmc0:59b4 ED2S5 119 GiB [ 1.011179] mmcblk0: p1 p2 [ 1.111123] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.266028] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 1.266040] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.266046] usb 1-1: Product: USB2.0 Hub [ 1.267249] hub 1-1:1.0: USB hub found [ 1.267554] hub 1-1:1.0: 4 ports detected [ 1.563093] usb 1-1.2: new high-speed USB device number 3 using xhci_hcd [ 1.663799] usb 1-1.2: New USB device found, idVendor=22e8, idProduct=dac2, bcdDevice=11.00 [ 1.663805] usb 1-1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=2 [ 1.663811] usb 1-1.2: Product: CA DacMagic 200M 2.0 [ 1.663816] usb 1-1.2: Manufacturer: CA [ 1.666695] hid-generic 0003:22E8:DAC2.0001: hiddev96,hidraw0: USB HID v1.10 Device [CA CA DacMagic 200M 2.0] on usb-0000:01:00.0-1.2/input3 [ 3.271762] zram: Added device: zram0 [ 3.332003] zram0: detected capacity change from 0 to 2043920384 [ 3.334502] random: mkswap: uninitialized urandom read (16 bytes read) [ 3.375105] Adding 1996012k swap on /dev/zram0. Priority:-2 extents:1 across:1996012k SSFS [ 3.429047] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.691762] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.752919] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 7.144547] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 7.145386] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 7.145399] [vc_sm_connected_init]: start [ 7.147338] vc_sm_cma_vchi_init: failed to open VCHI service (-1) [ 7.147347] [vc_sm_connected_init]: failed to initialize shared memory service [ 7.182828] mc: Linux media interface: v0.10 [ 7.196945] input: raspberrypi-ts as /devices/platform/soc/soc:firmware/soc:firmware:touchscreen/input/input0 [ 7.205956] usb 1-1.2: 1:3 : unsupported format bits 0x100000000 [ 7.209428] usbcore: registered new interface driver snd-usb-audio [ 7.377916] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 7.378154] bcmgenet fd580000.ethernet eth0: Link is Down [ 7.440578] Starting piCorePlayer v8.1.0 startup. [ 7.453950] cryptd: max_cpu_qlen set to 1000 [
------------------------------------------------------------------------ Bscott's Profile: http://forums.slimdevices.com/member.php?userid=72330 View this thread: http://forums.slimdevices.com/showthread.php?t=104486 _______________________________________________ plugins mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/plugins
