Phillipe I am now using the Dev but am still seeing some "issues". The Onkyo does not have network standby (although the manual says it should, Onkyo support say this model doesn't) so when I have finished work I put the Onkyo into power standby mode i.e. switch it off as far as the network is concerned. From the logs I can see that 10 minutes or so later sq2u stops for no apparent reason. I then have to switch it on again in the morning. That isn't the intention is it ?
Log extract. [17:16:17.529426] sendSTAT:166 [0x8091b40]: STAT:[STMp] msplayed 264000 [17:16:17.529441] sendSTAT:168 [0x8091b40] STAT: STMp [17:16:17.529474] process_strm:272 [0x8091b40] pause interval: 0 [17:16:17.534396] process:588 [0x8091b40] aude [17:16:17.534465] process_aude:472 [0x8091b40] on/off using aude 0 [17:16:17.534483] decode_flush:197 [0x8091b40]: decode flush [17:16:17.534500] output_flush:837 [0x8091b40]: flush output buffer [17:16:17.544153] AVTBasic:313 uPNP Stop for http://10.0.0.194:8888/upnp_control_2 (cookie 0x89d) [17:16:17.549408] sq_callback:266 [0x80e9f00]: device set on/off 0 [17:16:17.549481] sq_callback:270 [0x80e9f00]: device off or not controlled by LMS [17:16:18.904049] CallbackEventHandler:763 Answer to uPNP search -1297967920 [17:16:19.004441] CallbackEventHandler:763 Answer to uPNP search -1295983096 [17:16:19.038484] CallbackEventHandler:763 Answer to uPNP search -1297967920 [17:16:19.122348] CallbackEventHandler:763 Answer to uPNP search -1297967920 [17:16:19.385375] CallbackEventHandler:763 Answer to uPNP search -1297967920 [17:16:19.581977] CallbackEventHandler:763 Answer to uPNP search -1297967920 [17:16:19.639597] CallbackEventHandler:763 Answer to uPNP search -1297967920 [17:16:19.804450] CallbackEventHandler:763 Answer to uPNP search -1297967920 [17:16:19.932391] CallbackEventHandler:763 Answer to uPNP search -1297967920 [17:16:20.001046] process:588 [0x8091b40] strm [17:16:20.001111] process_strm:242 [0x8091b40] strm command t [17:16:20.001131] sendSTAT:168 [0x8091b40] STAT: STMt [17:16:20.211620] CallbackActionHandler:738 Error in action callback -- -204 (cookie 0x898) [17:16:20.394606] CallbackEventHandler:763 Answer to uPNP search -1297967920 [17:16:20.567220] CallbackEventHandler:763 Answer to uPNP search -1297967920 [17:16:20.715496] CallbackActionHandler:738 Error in action callback -- -204 (cookie 0x899) [17:16:20.944958] CallbackEventHandler:763 Answer to uPNP search -1297969624 [17:16:21.012984] CallbackEventHandler:763 Answer to uPNP search -1297969624 [17:16:21.069672] CallbackEventHandler:763 Answer to uPNP search -1297969624 [17:16:21.213630] CallbackActionHandler:738 Error in action callback -- -204 (cookie 0x89a) [17:16:21.214211] CallbackEventHandler:763 Answer to uPNP search -1297969624 [17:16:21.716057] CallbackActionHandler:738 Error in action callback -- -204 (cookie 0x89b) [17:16:21.858821] CallbackEventHandler:763 Answer to uPNP search -1297969624 [17:16:22.211877] CallbackActionHandler:738 Error in action callback -- -204 (cookie 0x89c) [17:16:22.554717] CallbackActionHandler:738 Error in action callback -- -204 (cookie 0x89d) [17:16:24.001087] process:588 [0x8091b40] strm [17:16:24.001158] process_strm:242 [0x8091b40] strm command t [17:16:24.001179] sendSTAT:168 [0x8091b40] STAT: STMt [17:16:28.001097] process:588 [0x8091b40] strm [17:16:28.001192] process_strm:242 [0x8091b40] strm command t [17:16:28.001251] sendSTAT:168 [0x8091b40] STAT: STMt [17:16:33.001140] process:588 [0x8091b40] strm [17:16:33.001246] process_strm:242 [0x8091b40] strm command t [17:16:33.001269] sendSTAT:168 [0x8091b40] STAT: STMt [17:16:33.002584] UpdateMRThread:851 Begin uPnP devices update [17:16:33.229124] UpdateMRThread:931 [0x80e9f00]: removing renderer (CR-N755) [17:16:33.229191] slimproto_close:1019 [0x8091b40] slimproto stop for CR-N755 [17:16:33.229240] output_mr_close:817 [0x8091b40] close media renderer [17:16:33.301019] decode_close:180 close decode Then empty until I switch on again in the morning 18675 Config File 18676 +-------------------------------------------------------------------+ |Filename: config.xml.txt | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=18676| +-------------------------------------------------------------------+ *Vortexbox LMS 7.8 music on QNAP TS419p via NFS* - iThingys/iPeng/Tablets *Living Room* - SB3 -> Onkyo TS606 connected Digitally - > Celestion Ditton F20s - and connected Analogue for Zone 2 -> Sony TA FE 320 -> Sennheiser RS 130 *Office* - SB3 -> Sony TA FE320 -> Wharfedale Modus Cubes *Dining Room* -> SB Boom *Kitchen* -> UE Radio (upgraded to SB Radio) *Bedroom (Bedside)* - SB Touch -> Topping TP21 -> AKG Headphones *Bedroom (TV)* - Amazon Fire TV (SB Player) -> Topping TP20 -> Wharfedale Modus Cubes ------------------------------------------------------------------------ d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=103728 _______________________________________________ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
