On Tue, 16 Dec 2008 10:39:10 +1100, Nigel Cunningham wrote: > Hi Brian. Hi, > Sorry for putting you wrong there - now that I've read the menuconfig > page about the i915 module, I know that it's the DRM module for X.
Yeah. I came to that conclusion as well. > Without X running, it _should_ be unloadable. And in fact when booting with init=/bin/bash, it isn't even loaded at all, but that doesn't help unfortunately. > The only remaining thing I can think of is to ask you to send us your > dmesg, preferably including the output from the first cycle. If you were > to turn on Verbose Power Management debugging messages as well (if > they're not already on - in the Power management and ACPI options menu > in the kernel config) and make the kernel log buffer nice and big so no > output is lost (General setup -> Kernel log buffer size), that would be > great. OK. Rebuilding now. I configured a kernel log buffer size of 524288 (shift 19) so that should be good and big. When done, I will boot into single user mode again and do a suspend/ resume and save the dmesg output and attach it here (or post it somewhere and point to it here). Of course, I can't send the dmesg from the second cycle as it's dead after the second cycle resume. If only this (what's turning out to be a POS) laptop (that's going back to the store if this does not resolve fairly soon) had a serial port I could get a serial console and capture that. b. _______________________________________________ Pm-utils mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/pm-utils
