On Fri, 2009-02-27 at 15:26 -0500, Don Harden wrote:
> Hello,
>
> I have the following:
> HP Pavilion dv7 laptop with an Intel Core2 Duo T9400 and 4 GB of RAM
> Fedora 10 2.6.27.15-170.2.24.fc10.x86_64
> pm-utils-1.2.2.1-2.fc10
> hal-0.5.12-14.20081027git.fc10
>
> Everything runs great including suspending, hibernating and resuming except
> that when the laptop resumes from a suspend or hibernation there is no
> battery info:
> {0}duder:/home/don > cat /proc/acpi/battery/BAT0/alarm
> present: no
> {0}duder:/home/don > cat /proc/acpi/battery/BAT0/info
> present: no
> {0}duder:/home/don > cat /proc/acpi/battery/BAT0/state
> present: no
>
> Before a suspend or hibernation and resume the battery info is as expected:
> {0}duder:/home/don/bin > cat /proc/acpi/battery/BAT0/info
>
> present: yes
>
> design capacity: 5100 mAh
>
> last full capacity: 4800 mAh
>
> battery technology: rechargeable
>
> design voltage: 14400 mV
>
> design capacity warning: 240 mAh
>
> design capacity low: 144 mAh
>
> capacity granularity 1: 264 mAh
>
> capacity granularity 2: 3780 mAh
>
> model number: Primary
>
> serial number:
>
> battery type: Lion
>
> OEM info: Hewlett-Packard
>
>
> It does not matter if the laptop is running on AC power or the battery
>
> Booting with every combination of turning acpid on or off and turning the
> pci=noapci kernel flag on or off has no effect.
>
> I spent a good deal of time Googling and searching the pm-utils archives but
> found no solution.
>
> I've also tried the suggestions on the HAL Quirk site,
> http://people.freedesktop.org/~hughsient/quirk/index.html but still no joy.
>
> Any ideas to get my battery info after a resume?
Does unloading->loading the battery module after suspend cure the
problem? Do you have the latest BIOS for your machine installed?
Regards,
Holger
_______________________________________________
Pm-utils mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/pm-utils
