On 6/18/05, Ben Hooper <[EMAIL PROTECTED]> wrote: > > |Btw. the BSD-Airtools fail too (tested with a Wi-Interface > |wich should be > |definitifly supported by the BSD-Airtools). > > I use dstumbler frequetly with wi(4). What problems are you seeing?
Indeed. All my cards work with airtools. You'll note that there hasn't been a new release of bsd-airtools in ages. These three are prism... wi0 at pci1 dev 2 function 0 "Intersil PRISM2.5" rev 0x01: irq 11 wi0: PRISM2.5 ISL3874A(Mini-PCI), Firmware 1.1.0 (primary), 1.4.9 (station), address 00:05:3c:04:b5:d4 wi1 at pcmcia0 function 0 "Instant Wireless , Network PC CARD, Version 01.02" port 0xa000/64 wi1: PRISM2 HWB3163 rev.A, Firmware 0.3.0 (primary), 0.8.3 (station), address 00:06:25:52:2f:de wi2 at pcmcia1 function 0 "WLAN, 11Mbps_PC-Card_3.0, ISL37100P" port 0xa000/64 wi2: PRISM3 ISL37300P, Firmware 1.1.1 (primary), 1.8.0 (station), address 00:02:6f:33:69:1a This one's an orinoco, so I can't use monitor mode, but it works too... wi1 at pcmcia0 function 0 "Compaq, Compaq WL110 PC Card, Version 01.01" port 0xa000/64 wi1: Firmware 8.72 variant 1, address 00:02:a5:2e:1c:5f -- GDB has a 'break' feature; why doesn't it have 'fix' too?