On 2006/11/08 21:35, Matthias Kilian wrote:
> On Sun, Oct 29, 2006 at 04:15:40PM +0100, Steffen Schuetz wrote:
> > With ath(4) only detecting networks worked; i was not able to
> > capture data packets.
>
> I've got another report where not even detection worked. Which
> capture source did you use?
same for me, fwiw. detection doesn't work, ath(4) (as supplied
with some thinkpad x40 models), radiotap_bsd_b.
ath0 at pci1 dev 2 function 0 "Atheros AR5212" rev 0x01: irq 11
ath0: AR5213 5.9 phy 4.3 rf2112a 4.6, WOR0W, address 00:0e:9b:93:23:e4
channels do hop, changing out of monitor mode doesn't help.
run tcpdump -y IEEE802_11_RADIO while it's running and it starts
picking up networks (and IP addresses from ARP, etc).
> I just veryfied that ral(4) doesn't work (using radiotap_bsd_b),
> however I didn't try the part disabling monitor mode.
same for me, in monitor mode channel doesn't hop. I also get
8x "could not write to RF" kernel messages when starting kismet
(I think at the point in which it goes into monitor mode,
but I'm not 100% sure) and 8x when stopping it.
switch to ibss and channels start hopping and it picks up
networks straight away. I don't get "could not write to RF"
if I switch into monitor myself before starting kismet (but
detection still doesn't work until I force it out of monitor).
running tcpdump -y ... doesn't make ralink start to detect.
Nov 8 21:20:24 zeyk /bsd: ral0 at cardbus0 dev 0 function 0 "ASUSTeK Computer
, Inc., RT2500, 802.11 CardBus Reference Card": irq 11, address
00:11:d8:20:48:ee
Nov 8 21:20:24 zeyk /bsd: ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
Nov 8 21:20:42 zeyk /bsd: ral0: could not write to RF
Nov 8 21:21:07 zeyk last message repeated 15 times
Nov 8 21:21:57 zeyk /bsd: ral0: could not write to RF
Nov 8 21:21:59 zeyk last message repeated 7 times
> On the other hand, tcpdump -y IEEE802_11_RADOI *did* work.
tcpdump -y IEEE..RADIO works for me with both cards (monitor and ibss)
for the sake of completeness,
OpenBSD 4.0-current (GENERIC) #1202: Mon Nov 6 20:20:14 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1200MHz ("GenuineIntel" 686-class) 1.20
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2
cpu0: Enhanced SpeedStep 1200 MHz (1180 mV): speeds: 1200, 1100, 1000, 900,
800, 600 MHz
real mem = 526807040 (514460K)
avail mem = 472543232 (461468K)
using 4256 buffers containing 26464256 bytes (25844K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(0d) BIOS, date 03/01/06, BIOS32 rev. 0 @ 0xfd740,
SMBIOS rev. 2.33 @ 0xe0010 (56 entries)
bios0: IBM 23718EG
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd6d0/0x930
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/256 (14 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xc800! 0xcc800/0x1000 0xcd800/0x1000 0xdc000/0x4000!
0xe0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82852GM Hub-PCI" rev 0x02
"Intel 82852GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82852GM Configuration" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82852GM AGP" rev 0x02: aperture at
0xe0000000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82852GM AGP" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci1 at ppb0 bus 2
cbb0 at pci1 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x8d: irq 11
sdhc0 at pci1 dev 0 function 1 "Ricoh 5C822 SD/MMC" rev 0x13: irq 11
sdmmc0 at sdhc0
em0 at pci1 dev 1 function 0 "Intel PRO/1000MT Mobile (82541GI)" rev 0x00: irq
11, address 00:0a:e4:2d:99:ee
ath0 at pci1 dev 2 function 0 "Atheros AR5212" rev 0x01: irq 11
ath0: AR5213 5.9 phy 4.3 rf2112a 4.6, WOR0W, address 00:0e:9b:93:23:e4
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK13FA-40B>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4
AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uplcom0 at uhub1 port 1
uplcom0: Prolific Technology Inc. USB-Serial Controller, rev 1.10/3.00, addr 2
ucom0 at uplcom0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
ral0 at cardbus0 dev 0 function 0 "ASUSTeK Computer , Inc., RT2500, 802.11
CardBus Reference Card": irq 11, address 00:11:d8:20:48:ee
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
