I've got a pretty consistent segfault:
[EMAIL PROTECTED]:/home/seklecki# gdb /usr/local/sbin/snmpd
/home/seklecki/snmpd.core
Core was generated by `snmpd'.
Program terminated with signal 11, Segmentation fault.
Reading symbols from /usr/local/lib/libnetsnmpagent.so.6.3...(no debugging
symbols found)...done.
Loaded symbols for /usr/local/lib/libnetsnmpagent.so.6.3
Reading symbols from /usr/local/lib/libnetsnmpmibs.so.6.3...done.
Loaded symbols for /usr/local/lib/libnetsnmpmibs.so.6.3
Reading symbols from /usr/local/lib/libnetsnmphelpers.so.6.3...done.
Loaded symbols for /usr/local/lib/libnetsnmphelpers.so.6.3
Reading symbols from /usr/lib/libwrap.so.4.0...done.
Loaded symbols for /usr/lib/libwrap.so.4.0
Reading symbols from /usr/local/lib/libnetsnmp.so.6.3...done.
Loaded symbols for /usr/local/lib/libnetsnmp.so.6.3
Reading symbols from /usr/lib/libkvm.so.8.0...done.
Loaded symbols for /usr/lib/libkvm.so.8.0
Reading symbols from /usr/lib/libz.so.4.1...done.
Loaded symbols for /usr/lib/libz.so.4.1
Reading symbols from /usr/lib/libcrypto.so.13.0...done.
Loaded symbols for /usr/lib/libcrypto.so.13.0
Reading symbols from /usr/lib/libm.so.2.3...done.
Loaded symbols for /usr/lib/libm.so.2.3
Reading symbols from /usr/lib/libc.so.39.3...done.
Loaded symbols for /usr/lib/libc.so.39.3
Reading symbols from /usr/libexec/ld.so...done.
Loaded symbols for /usr/libexec/ld.so
#0 0x089b3d71 in memmove () from /usr/lib/libc.so.39.3
(gdb) bt
#0 0x089b3d71 in memmove () from /usr/lib/libc.so.39.3
#1 0x0cf6bede in snmp_set_var_objid () from
/usr/local/lib/libnetsnmp.so.6.3
#2 0x0cf92b0c in snmp_varlist_add_variable () from
/usr/local/lib/libnetsnmp.so.6.3
#3 0x0cf92a9c in snmp_pdu_add_variable () from
/usr/local/lib/libnetsnmp.so.6.3
#4 0x0cf6b7db in snmp_add_null_var () from
/usr/local/lib/libnetsnmp.so.6.3
#5 0x08757bf5 in mte_run_trigger () from
/usr/local/lib/libnetsnmpmibs.so.6.3
#6 0x0cfab923 in run_alarms () from /usr/local/lib/libnetsnmp.so.6.3
#7 0x1c003da5 in SnmpdCatchRandomSignal ()
#8 0x1c003204 in SnmpdCatchRandomSignal ()
#9 0x1c001ea0 in ?? ()
#10 0x00000005 in ?? ()
#11 0xcf7df148 in ?? ()
#12 0xcf7df160 in ?? ()
#13 0x1c001e31 in ?? ()
#14 0xcf7df2bc in ?? ()
#15 0xcf7df124 in ?? ()
#16 0x1c001885 in ?? ()
#17 0x1c001e8e in ?? ()
#18 0x00000000 in ?? ()
(gdb)
This system 4.0-stable as of last Wednesday with a slightly modified
kernel (RAIDFrame enabled):
[EMAIL PROTECTED]:/home/seklecki# uname -a
OpenBSD br0 4.0 GENERIC+RAIDFrame#2 i386 (full dmesg below)
I will try to recompile Net-SNMP from source to see if the mismatch
between GENERIC and the "recommended" 4.0 binaries is the cause. I will
also try to figure out why it's only partially being built with debugging
symbols.
~BAS
l8*
-lava (Brian A. Seklecki - Pittsburgh, PA, USA)
http://www.spiritual-machines.org/
"...from back in the heady days when "helpdesk" meant nothing, "diskquota"
meant everything, and lives could be bought and sold for a couple of pages
of laser printout - and frequently were."
OpenBSD 4.0-stable (GENERIC+RAIDFrame) #2: Wed Dec 6 22:26:09 EST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC+RAIDFrame
cpu0: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,
SSE3,MWAIT,DS-CPL,CNXT-ID,CX16
real mem = 534921216 (522384K)
avail mem = 479571968 (468332K)
using 4256 buffers containing 26849280 bytes (26220K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 08/18/05, BIOS32 rev. 0 @
0xffe90, SMBIOS rev. 2.3 @ 0xf0450 (92 entries)
bios0: Dell Inc. PowerEdge SC1420
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfeb00/256 (14 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev
0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800 0xc8800/0x1800!
0xca000/0x2000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x09
"Intel E7520 MCH ERR" rev 0x09 at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x09
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x00
pci2 at ppb1 bus 2
vga1 at pci2 dev 12 function 0 "ATI Mach64 GO" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x00
pci3 at ppb2 bus 3
xl0 at pci3 dev 13 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 10,
address 00:50:da:28:37:7f
bmtphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 6
em0 at pci3 dev 14 function 0 "Intel PRO/1000MT (82545GM)" rev 0x04: irq
11, address 00:12:3f:61:7a:75
ppb3 at pci0 dev 3 function 0 "Intel MCH PCIE" rev 0x09
pci4 at ppb3 bus 4
ppb4 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x09
pci5 at ppb4 bus 5
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 9
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 5
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci6 at ppb5 bus 6
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 conf
igured to compatibility
pciide0: channel 0 ignored (disabled)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITE-ON, CD-ROM LTN-489S, 8DS2> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configure
d to native-PCI
pciide1: using irq 9 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD800JD-75LSA0>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide1 channel 1 drive 0: <WDC WD800JD-75LSA0>
wd1: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq
10
iic0 at ichiic0
adt0 at iic0 addr 0x2e: emc6w201 rev 0xb1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask ff65 netmask ff65 ttymask ffe7
pctr: user-level cycle counter enabled
Kernelized RAIDframe activated
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
raid0 (root): (RAID Level 1) total number of sectors is 4194176 (2047 MB)
raid1 (root): (RAID Level 1) total number of sectors is 151791744 (74117
MB) as root
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
swapmount: no device
carp: pfsync0 demoted group carp to 1
