Travers Buda wrote: > > Whell, of course, =); it's a place to start. Another place to start would be > trying to reproduce this on i386 -current... Didier?
Hello, Ok, I tested it on: 1) Openbsd 4.0 stable amd64 architecture: (OpenBSD test 4.0 GENERIC.MP#1 amd64) I was not able to run it, when trying to connect I got the following error from the viewer: "InStream max string length exceeded Do you wish to attempt to reconnect etc ..." 2) and on the same system with the current i386 snapshot, tightvnc works! See the dmesg of the test system below: OpenBSD 4.0-current (GENERIC) #1323: Sat Dec 30 14:08:27 MST 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz ("GenuineIntel" 686-class) 2.41 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16 real mem = 2146529280 (2096220K) avail mem = 1949810688 (1904112K) using 4256 buffers containing 107450368 bytes (104932K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 09/22/06, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.4 @ 0xf0690 (74 entries) bios0: stem manufacturer P5WDG2 WS PRO apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf71a0/320 (18 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00) pcibios0: PCI bus #5 is the last bus bios0: ROM list: 0xc0000/0xee00 0xcf000/0x2600 acpi at mainbus0 not configured cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x277c rev 0xc0 ppb0 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x277d rev 0xc0 pci1 at ppb0 bus 5 vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0163 rev 0xa1 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01 pci2 at ppb1 bus 3 ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09 pci3 at ppb2 bus 4 ami0 at pci3 dev 1 function 0 "Symbios Logic MegaRAID" rev 0x01: irq 10 ami0: LSI 523, 32b, FW 713R, BIOS vG121, 64MB RAM ami0: 1 channels, 0 FC loops, 1 logical drives scsibus0 at ami0: 40 targets sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed sd0: 1526196MB, 1526196 cyl, 64 head, 32 sec, 512 bytes/sec, 3125649408 sec total scsibus1 at ami0: 16 targets ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01 pci4 at ppb3 bus 2 mskc0 at pci4 dev 0 function 0 "Marvell Yukon 88E8052" rev 0x21, Marvell Yukon-2 EC rev. A3 (0x2): irq 10 msk0 at mskc0 port A, address 00:18:f3:46:84:3d eephy0 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 7 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 3 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 5 usb3 at uhci3: USB revision 1.0 uhub3 at usb3 uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 11 usb4 at ehci0: USB revision 2.0 uhub4 at usb4 uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1 pci5 at ppb4 bus 1 "TI TSB43AB22 FireWire" rev 0x00 at pci5 dev 3 function 0 not configured skc0 at pci5 dev 5 function 0 "Marvell Yukon 88E8001/8003/8010" rev 0x14, Marvell Yukon Lite (0x9): irq 11 sk0 at skc0 port A, address 00:18:f3:46:84:3e eephy1 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5 ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus2 at atapiscsi0: 2 targets cd0 at scsibus2 targ 0 lun 0: <_NEC, DVD_RW ND-4571A, 1-01> SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using irq 10 for native-PCI interrupt ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 10 iic0 at ichiic0 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lm0 at isa0 port 0x290/8: unknown Winbond chip (ID 0xc1) npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask efed netmask efed ttymask ffef pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support dkcsum: sd0 matches BIOS drive 0x80 root on sd0a rootdev=0x400 rrootdev=0xd00 rawdev=0xd02 Kind regards Didier