On Tuesday 09 January 2007 09:23, Kurt Miller wrote:
> On Monday 08 January 2007 8:38 pm, bofh wrote:
> ...
>
> > data(kbytes) 1048576
>
> ...
>
> >
> > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.M
> >P
>
> ...
>
> > real mem = 3219894272 (3144428K)
>
> Nice bug report (i.e. had everything I needed to deduce
> the reason), but please post port building problems on
> ports@ and/or to maintainer. I easily could have missed your
> email due to the signal to noise ratio on [EMAIL PROTECTED]
>
> The problem is that the jdk sizes the default memory
> usage based on real mem installed in the box so with
> systems with lots of real mem it can set the useage
> higher then the 1G datasize limit.
>
> I thought I fixed this before but perhaps the fix
> was i386 only. I'll look into it again and send a
> patch for you to test.
>
> -Kurt
Kurt,
Building and installing the lang/jdk/1.3, lang/jdk/1.3-linux and
lang/jdk/1.4 ports of 4.0-STABLE worked perfectly. Though I can't test
the 1G issue you mentioned, I did hit an issue building the lang/kaffe
dependency while trying to build the devel/jdk/1.5 port.
I've managed to repeat the error on the second attempt when just trying
to build /lang/kaffe
The 'easy' part works just fine ;-)
# make
completes successuflly
The problem is when building the package.
# make package
this dies a miserable death...
You might want to note that the error below is sligtly different than
the one posted to misc@ on the first time through. Somehow junk is
getting appended to one of the path names. "Documeowwve" below and
"javaoosowxuownonowmkwssxozuwo" in the error previously posted error
sent to [EMAIL PROTECTED]
Making install in lib
gmake[3]: Entering directory
`/usr/ports/lang/kaffe/w-kaffe-1.1.7p2/build-i386/libraries/javalib/external/classpath/lib'
true
top_builddir=..
top_srcdir=/usr/ports/lang/kaffe/w-kaffe-1.1.7p2/kaffe-1.1.7/libraries/javalib/external/classpath
/bin/sh ./gen-classlist.sh
standard
Adding java source files from srcdir
'/usr/ports/lang/kaffe/w-kaffe-1.1.7p2/kaffe-1.1.7/libraries/javalib/external/classpath'.
Adding java source files from VM
directory
/usr/ports/lang/kaffe/w-kaffe-1.1.7p2/kaffe-1.1.7/libraries/javalib/vmspecific
Adding generated files in builddir '..'.
gmake[3]: *** No rule to make target
`/usr/ports/lang/kaffe/w-kaffe-1.1.7p2/kaffe-1.1.7/libraries/javalib/external/classpath/javax/swing/event/Documeowwve~',
needed by `compile-classes'. Stop.
gmake[3]: Leaving directory
`/usr/ports/lang/kaffe/w-kaffe-1.1.7p2/build-i386/libraries/javalib/external/classpath/lib'
gmake[2]: *** [install-recursive] Error 1
gmake[2]: Leaving directory
`/usr/ports/lang/kaffe/w-kaffe-1.1.7p2/build-i386/libraries/javalib/external/classpath'
gmake[1]: *** [install-recursive] Error 1
gmake[1]: Leaving directory
`/usr/ports/lang/kaffe/w-kaffe-1.1.7p2/build-i386/libraries/javalib'
gmake: *** [install-recursive] Error 1
*** Error code 2
Stop in /usr/ports/lang/kaffe (line 1995
of /usr/ports/infrastructure/mk/bsd.port.mk).
$
The error smells weird so I'll try updating -stable again just to make
sure I don't have something corrupted. Since the last time I updated
ports two weeks ago, I had to fsck this box due to a power loss during
a bad storm, so the problem might be on my end.
And of course, my dmesg.
OpenBSD 4.0-stable (GENERIC.MP) #2: Fri Dec 29 07:50:04 PST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
real mem = 1072754688 (1047612K)
avail mem = 970498048 (947752K)
using 4256 buffers containing 53739520 bytes (52480K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 11/01/04, BIOS32 rev. 0 @
0xffe90, SMBIOS rev. 2.3 @ 0xf0450 (114 entries)
bios0: Dell Computer Corporation Precision WorkStation 530 MT
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfba00/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801BA LPC" rev
0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x8800 0xc8800/0x2800
mainbus0: Intel MP Specification (Version 1.4) (DELL WS 530 )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82860 Host" rev 0x04: rng active,
7Kb/sec
ppb0 at pci0 dev 1 function 0 "Intel 82850/82860 AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Matrox MGA G400/G450 AGP" rev 0x82
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 2 function 0 "Intel 82860 PCI-PCI" rev 0x04
pci2 at ppb1 bus 2
ppb2 at pci2 dev 31 function 0 "Intel 82806AA" rev 0x03
pci3 at ppb2 bus 3
"Intel 82806AA APIC" rev 0x01 at pci3 dev 0 function 0 not configured
ami0 at pci3 dev 13 function 0 "Symbios Logic MegaRAID" rev 0x01: apic 2
int 21 (irq 10)
ami0: LSI 523, 32b, FW 713R, BIOS vG121, 64MB RAM
ami0: 1 channels, 0 FC loops, 1 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct
fixed
sd0: 457749MB, 457749 cyl, 64 head, 32 sec, 512 bytes/sec, 937469952 sec
total
scsibus1 at ami0: 16 targets
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x04
pci4 at ppb3 bus 4
xl0 at pci4 dev 11 function 0 "3Com 3c905C 100Base-TX" rev 0x78: apic 2
int 23 (irq 9)xl0: reset didn't complete
, address 00:06:5b:87:ad:bd
exphy0 at xl0 phy 24: 3Com internal media interface
xl0: reset didn't complete
"TI TSB12LV26 FireWire" rev 0x00 at pci4 dev 12 function 0 not
configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x04
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x04: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 7Y250P0>
wd0: 16-sector PIO, LBA48, 239372MB, 490234752 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <LITE-ON, LTR-48246S, SUS5> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x04: apic 2 int
19 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ichiic0 at pci0 dev 31 function 3 "Intel 82801BA SMBus" rev 0x04: apic 2
int 17 (irq 9)
iic0 at ichiic0
admtemp0 at iic0 addr 0x18: adm1023
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x04: apic 2 int
23 (irq 9)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
auich0 at pci0 dev 31 function 5 "Intel 82801BA AC97" rev 0x04: apic 2
int 17 (irq 9), ICH2 AC97
ac97: codec id 0x41445360 (Analog Devices AD1885)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 0 netmask 0 ttymask 0
ioapic0: pin 17 shares different IPL interrupts (40..90), degraded
performance
ioapic0: pin 23 shares different IPL interrupts (40..50), degraded
performance
pctr: user-level cycle counter enabled
apm0: disconnected
dkcsum: sd0 matches BIOS drive 0x80
dkcsum: wd0 matches BIOS drive 0x81
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
auich0: measured ac97 link rate at 55935 Hz
