The PINE H64 ver. B is a minor revision of the original H64. I copied the device tree from the Linux kernel.
dmesg: http://ix.io/3M3r ok? Index: sysutils/arm-trusted-firmware/Makefile =================================================================== RCS file: /cvs/ports/sysutils/arm-trusted-firmware/Makefile,v retrieving revision 1.16 diff -u -p -u -p -r1.16 Makefile --- sysutils/arm-trusted-firmware/Makefile 18 Jun 2021 09:17:28 -0000 1.16 +++ sysutils/arm-trusted-firmware/Makefile 13 Jan 2022 08:54:30 -0000 @@ -9,6 +9,7 @@ GH_PROJECT= arm-trusted-firmware GH_TAGNAME= v2.5 EPOCH= 0 +REVISION= 0 CATEGORIES= sysutils @@ -32,7 +33,8 @@ CFLAGS= PLATFORMS=\ rk3328 \ rk3399 \ - sun50i_a64 + sun50i_a64 \ + sun50i_h6 do-build: .for P in ${PLATFORMS} @@ -49,5 +51,7 @@ do-install: ${PREFIX}/share/arm-trusted-firmware/rk3399-bl31.elf ${INSTALL_DATA} ${WRKBUILD}/build/sun50i_a64/debug/bl31.bin \ ${PREFIX}/share/arm-trusted-firmware/sun50i_a64-bl31.bin + ${INSTALL_DATA} ${WRKBUILD}/build/sun50i_h6/debug/bl31.bin \ + ${PREFIX}/share/arm-trusted-firmware/sun50i_h6-bl31.bin .include <bsd.port.mk> Index: sysutils/arm-trusted-firmware/pkg/PLIST =================================================================== RCS file: /cvs/ports/sysutils/arm-trusted-firmware/pkg/PLIST,v retrieving revision 1.4 diff -u -p -u -p -r1.4 PLIST --- sysutils/arm-trusted-firmware/pkg/PLIST 27 Sep 2019 15:43:29 -0000 1.4 +++ sysutils/arm-trusted-firmware/pkg/PLIST 13 Jan 2022 08:54:30 -0000 @@ -4,3 +4,4 @@ share/arm-trusted-firmware/ share/arm-trusted-firmware/rk3328-bl31.elf share/arm-trusted-firmware/rk3399-bl31.elf share/arm-trusted-firmware/sun50i_a64-bl31.bin +share/arm-trusted-firmware/sun50i_h6-bl31.bin Index: sysutils/u-boot/Makefile =================================================================== RCS file: /cvs/ports/sysutils/u-boot/Makefile,v retrieving revision 1.89 diff -u -p -u -p -r1.89 Makefile --- sysutils/u-boot/Makefile 17 Dec 2021 23:00:41 -0000 1.89 +++ sysutils/u-boot/Makefile 13 Jan 2022 08:54:31 -0000 @@ -8,7 +8,7 @@ FLAVOR?= arm COMMENT= U-Boot firmware VERSION= 2021.10 -REVISION= 2 +REVISION= 3 DISTNAME= u-boot-${VERSION} PKGNAME= u-boot-${FLAVOR}-${VERSION:S/-//} FULLPKGNAME= ${PKGNAME} @@ -44,6 +44,7 @@ MAKE_ENV+= CROSS_COMPILE="aarch64-none-e RK3328_BL31= "${LOCALBASE}/share/arm-trusted-firmware/rk3328-bl31.elf" RK3399_BL31= "${LOCALBASE}/share/arm-trusted-firmware/rk3399-bl31.elf" SUNXI_BL31= "${LOCALBASE}/share/arm-trusted-firmware/sun50i_a64-bl31.bin" +SUNXI_H6_BL31= "${LOCALBASE}/share/arm-trusted-firmware/sun50i_h6-bl31.bin" .elif "${FLAVOR}" == "arm" BUILD_DEPENDS+= devel/arm-none-eabi/gcc-linaro>=7.4.2019.02 MAKE_ENV+= CROSS_COMPILE="arm-none-eabi-" @@ -69,6 +70,7 @@ SUNXI64=\ orangepi_zero_plus \ pine64-lts \ pine64_plus \ + pine_h64-model-b \ pinebook \ sopine_baseboard BOARDS=\ @@ -203,6 +205,16 @@ do-build: .endif .endfor .for BOARD in ${SUNXI64} +.if "${BOARD:M*_h64*}" + cd ${WRKSRC} && \ + mkdir -p build/${BOARD} && \ + ${SETENV} ${MAKE_ENV} BL31=${SUNXI_H6_BL31} ${MAKE_PROGRAM} \ + ${MAKE_FLAGS} O="build/${BOARD}" \ + -f ${MAKE_FILE} "${BOARD}"_defconfig && \ + ${SETENV} ${MAKE_ENV} BL31=${SUNXI_H6_BL31} ${MAKE_PROGRAM} \ + ${MAKE_FLAGS} O="build/${BOARD}" \ + -f ${MAKE_FILE} ${ALL_TARGET} +.else cd ${WRKSRC} && \ mkdir -p build/${BOARD} && \ ${SETENV} ${MAKE_ENV} BL31=${SUNXI_BL31} ${MAKE_PROGRAM} \ @@ -211,6 +223,7 @@ do-build: ${SETENV} ${MAKE_ENV} BL31=${SUNXI_BL31} ${MAKE_PROGRAM} \ ${MAKE_FLAGS} O="build/${BOARD}" \ -f ${MAKE_FILE} ${ALL_TARGET} +.endif if [[ -f ${WRKSRC}/build/${BOARD}/spl/sunxi-spl.bin && \ -f ${WRKSRC}/build/${BOARD}/u-boot.itb ]]; then \ cd ${WRKSRC}/build/${BOARD} && \ Index: sysutils/u-boot/patches/patch-arch_arm_dts_Makefile =================================================================== RCS file: sysutils/u-boot/patches/patch-arch_arm_dts_Makefile diff -N sysutils/u-boot/patches/patch-arch_arm_dts_Makefile --- /dev/null 1 Jan 1970 00:00:00 -0000 +++ sysutils/u-boot/patches/patch-arch_arm_dts_Makefile 13 Jan 2022 08:54:31 -0000 @@ -0,0 +1,13 @@ +$OpenBSD$ + +Index: arch/arm/dts/Makefile +--- arch/arm/dts/Makefile.orig ++++ arch/arm/dts/Makefile +@@ -642,6 +642,7 @@ dtb-$(CONFIG_MACH_SUN50I_H6) += \ + sun50i-h6-orangepi-lite2.dtb \ + sun50i-h6-orangepi-one-plus.dtb \ + sun50i-h6-pine-h64.dtb \ ++ sun50i-h6-pine-h64-model-b.dtb \ + sun50i-h6-tanix-tx6.dtb + dtb-$(CONFIG_MACH_SUN50I_H616) += \ + sun50i-h616-orangepi-zero2.dtb Index: sysutils/u-boot/patches/patch-arch_arm_dts_sun50i-h6-pine-h64-model-b_dts =================================================================== RCS file: sysutils/u-boot/patches/patch-arch_arm_dts_sun50i-h6-pine-h64-model-b_dts diff -N sysutils/u-boot/patches/patch-arch_arm_dts_sun50i-h6-pine-h64-model-b_dts --- /dev/null 1 Jan 1970 00:00:00 -0000 +++ sysutils/u-boot/patches/patch-arch_arm_dts_sun50i-h6-pine-h64-model-b_dts 13 Jan 2022 08:54:31 -0000 @@ -0,0 +1,57 @@ +$OpenBSD$ + +Index: arch/arm/dts/sun50i-h6-pine-h64-model-b.dts +--- arch/arm/dts/sun50i-h6-pine-h64-model-b.dts.orig ++++ arch/arm/dts/sun50i-h6-pine-h64-model-b.dts +@@ -0,0 +1,51 @@ ++// SPDX-License-Identifier: (GPL-2.0+ or MIT) ++/* ++ * Copyright (C) 2019 Corentin LABBE <cla...@baylibre.com> ++ */ ++ ++#include "sun50i-h6-pine-h64.dts" ++ ++/ { ++ model = "Pine H64 model B"; ++ compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6"; ++ ++ /delete-node/ reg_gmac_3v3; ++ ++ wifi_pwrseq: wifi_pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ ++ post-power-on-delay-ms = <200>; ++ }; ++}; ++ ++&hdmi_connector { ++ /delete-property/ ddc-en-gpios; ++}; ++ ++&emac { ++ phy-supply = <®_aldo2>; ++}; ++ ++&mmc1 { ++ vmmc-supply = <®_cldo3>; ++ vqmmc-supply = <®_aldo1>; ++ mmc-pwrseq = <&wifi_pwrseq>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; ++ uart-has-rtscts; ++ status = "okay"; ++ ++ bluetooth { ++ compatible = "realtek,rtl8723bs-bt"; ++ device-wake-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */ ++ host-wake-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */ ++ enable-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */ ++ max-speed = <1500000>; ++ }; ++}; Index: sysutils/u-boot/patches/patch-configs_pine_h64-model-b_defconfig =================================================================== RCS file: sysutils/u-boot/patches/patch-configs_pine_h64-model-b_defconfig diff -N sysutils/u-boot/patches/patch-configs_pine_h64-model-b_defconfig --- /dev/null 1 Jan 1970 00:00:00 -0000 +++ sysutils/u-boot/patches/patch-configs_pine_h64-model-b_defconfig 13 Jan 2022 08:54:31 -0000 @@ -0,0 +1,27 @@ +$OpenBSD$ + +Index: configs/pine_h64-model-b_defconfig +--- configs/pine_h64-model-b_defconfig.orig ++++ configs/pine_h64-model-b_defconfig +@@ -0,0 +1,21 @@ ++CONFIG_ARM=y ++CONFIG_ARCH_SUNXI=y ++CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-pine-h64-model-b" ++CONFIG_SPL=y ++CONFIG_MACH_SUN50I_H6=y ++CONFIG_SUNXI_DRAM_H6_LPDDR3=y ++CONFIG_MACPWR="PC16" ++CONFIG_MMC0_CD_PIN="PF6" ++CONFIG_MMC_SUNXI_SLOT_EXTRA=2 ++CONFIG_USB3_VBUS_PIN="PL5" ++CONFIG_SPL_SPI_SUNXI=y ++# CONFIG_PSCI_RESET is not set ++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set ++CONFIG_SUN8I_EMAC=y ++CONFIG_PHY_SUN50I_USB3=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_XHCI_DWC3=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_USB_OHCI_HCD=y ++CONFIG_USB_DWC3=y ++# CONFIG_USB_DWC3_GADGET is not set Index: sysutils/u-boot/pkg/PFRAG.aarch64 =================================================================== RCS file: /cvs/ports/sysutils/u-boot/pkg/PFRAG.aarch64,v retrieving revision 1.26 diff -u -p -u -p -r1.26 PFRAG.aarch64 --- sysutils/u-boot/pkg/PFRAG.aarch64 29 Oct 2021 11:14:46 -0000 1.26 +++ sysutils/u-boot/pkg/PFRAG.aarch64 13 Jan 2022 08:54:31 -0000 @@ -117,6 +117,13 @@ share/u-boot/pine64_plus/sunxi-spl.bin share/u-boot/pine64_plus/u-boot-sunxi-with-spl.bin @comment share/u-boot/pine64_plus/u-boot.bin @comment share/u-boot/pine64_plus/u-boot.img +share/u-boot/pine_h64-model-b/ +share/u-boot/pine_h64-model-b/sunxi-spl.bin +@comment share/u-boot/pine_h64-model-b/u-boot +@comment share/u-boot/pine_h64-model-b/u-boot-spl.bin +share/u-boot/pine_h64-model-b/u-boot-sunxi-with-spl.bin +@comment share/u-boot/pine_h64-model-b/u-boot.bin +@comment share/u-boot/pine_h64-model-b/u-boot.img share/u-boot/pinebook-pro-rk3399/ share/u-boot/pinebook-pro-rk3399/idbloader.img @comment share/u-boot/pinebook-pro-rk3399/u-boot
