On Sat, Apr 26, 2008 at 03:14:32PM -0400, Deanna Phillips wrote: > This diff, from brad@, updates gnash to 0.8.2. So far, it's > only been tested on i386. > > Changes: http://gnashdev.org/?q=node/52 > > Brad takes MAINTAINER (yay!)
I seem to have just had a kernel panic while running a copy of gnash build from this port. I was in X obviously, so didn't have a chance to get into the debugger. I don't know that it'll be much use, but I've attached my dmesg.boot from after I rebooted. The only two interesting lines I saw were: uvm_mapent_alloc: out of static map entries uvm_mapent_alloc: out of static map entries
hidev0: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 sd1 detached sd0 detached scsibus1 detached umass0 detached wsmouse0 detached ums0 detached uhidev0 detached uhub6 detached uhub5 detached uhub5 at uhub0 port 3 "Standard Microsystems product 0x2502" rev 2.00/0.01 addr 2 uhub6 at uhub5 port 1 "Standard Microsystems product 0x2602" rev 2.00/0.00 addr 3 umass0 at uhub6 port 1 configuration 1 interface 0 "Generic Flash Card Reader" rev 2.00/4.44 addr 4 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets sd0 at scsibus1 targ 1 lun 0: <Generic, Flash HS-CF, 4.44> SCSI0 0/direct removable sd0: drive offline sd1 at scsibus1 targ 1 lun 1: <Generic, Flash HS-COMBO, 4.44> SCSI0 0/direct removable sd1: drive offline uhidev0 at uhub6 port 4 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/20.00 addr 5 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 sd1 detached sd0 detached scsibus1 detached umass0 detached wsmouse0 detached ums0 detached uhidev0 detached uhub6 detached uhub5 detached uhub5 at uhub0 port 3 "Standard Microsystems product 0x2502" rev 2.00/0.01 addr 2 uhub6 at uhub5 port 1 "Standard Microsystems product 0x2602" rev 2.00/0.00 addr 3 umass0 at uhub6 port 1 configuration 1 interface 0 "Generic Flash Card Reader" rev 2.00/4.44 addr 4 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets sd0 at scsibus1 targ 1 lun 0: <Generic, Flash HS-CF, 4.44> SCSI0 0/direct removable sd0: drive offline sd1 at scsibus1 targ 1 lun 1: <Generic, Flash HS-COMBO, 4.44> SCSI0 0/direct removable sd1: drive offline uhidev0 at uhub6 port 4 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/20.00 addr 5 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 ehci_idone: ex=0xd20eca00 is done! sd1 detached sd0 detached scsibus1 detached umass0 detached wsmouse0 detached ums0 detached uhidev0 detached uhub6 detached uhub5 detached uhub5 at uhub0 port 3 "Standard Microsystems product 0x2502" rev 2.00/0.01 addr 2 uhub6 at uhub5 port 1 "Standard Microsystems product 0x2602" rev 2.00/0.00 addr 3 umass0 at uhub6 port 1 configuration 1 interface 0 "Generic Flash Card Reader" rev 2.00/4.44 addr 4 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets sd0 at scsibus1 targ 1 lun 0: <Generic, Flash HS-CF, 4.44> SCSI0 0/direct removable sd0: drive offline sd1 at scsibus1 targ 1 lun 1: <Generic, Flash HS-COMBO, 4.44> SCSI0 0/direct removable sd1: drive offline uhidev0 at uhub6 port 4 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/20.00 addr 5 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 ehci_idone: ex=0xd2017e00 is done! sd1 detached sd0 detached scsibus1 detached umass0 detached wsmouse0 detached ums0 detached uhidev0 detached uhub6 detached uhub5 detached uhub5 at uhub0 port 3 "Standard Microsystems product 0x2502" rev 2.00/0.01 addr 2 uhub6 at uhub5 port 1 "Standard Microsystems product 0x2602" rev 2.00/0.00 addr 3 umass0 at uhub6 port 1 configuration 1 interface 0 "Generic Flash Card Reader" rev 2.00/4.44 addr 4 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets sd0 at scsibus1 targ 1 lun 0: <Generic, Flash HS-CF, 4.44> SCSI0 0/direct removable sd0: drive offline sd1 at scsibus1 targ 1 lun 1: <Generic, Flash HS-COMBO, 4.44> SCSI0 0/direct removable sd1: drive offline uhidev0 at uhub6 port 4 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/20.00 addr 5 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 pccom3: 1 silo overflow sd1 detached sd0 detached scsibus1 detached umass0 detached wsmouse0 detached ums0 detached uhidev0 detached uhub6 detached uhub5 detached uhub5 at uhub0 port 3 "Standard Microsystems product 0x2502" rev 2.00/0.01 addr 2 uhub6 at uhub5 port 1 "Standard Microsystems product 0x2602" rev 2.00/0.00 addr 3 umass0 at uhub6 port 1 configuration 1 interface 0 "Generic Flash Card Reader" rev 2.00/4.44 addr 4 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets sd0 at scsibus1 targ 1 lun 0: <Generic, Flash HS-CF, 4.44> SCSI0 0/direct removable sd0: drive offline sd1 at scsibus1 targ 1 lun 1: <Generic, Flash HS-COMBO, 4.44> SCSI0 0/direct removable sd1: drive offline uhidev0 at uhub6 port 4 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/20.00 addr 5 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 sd1 detached sd0 detached scsibus1 detached umass0 detached wsmouse0 detached ums0 detached uhidev0 detached uhub6 detached uhub5 detached uhub5 at uhub0 port 3 "Standard Microsystems product 0x2502" rev 2.00/0.01 addr 2 uhub6 at uhub5 port 1 "Standard Microsystems product 0x2602" rev 2.00/0.00 addr 3 umass0 at uhub6 port 1 configuration 1 interface 0 "Generic Flash Card Reader" rev 2.00/4.44 addr 4 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets sd0 at scsibus1 targ 1 lun 0: <Generic, Flash HS-CF, 4.44> SCSI0 0/direct removable sd0: drive offline sd1 at scsibus1 targ 1 lun 1: <Generic, Flash HS-COMBO, 4.44> SCSI0 0/direct removable sd1: drive offline uhidev0 at uhub6 port 4 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/20.00 addr 5 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 sd1 detached sd0 detached scsibus1 detached umass0 detached wsmouse0 detached ums0 detached uhidev0 detached uhub6 detached uhub5 detached uhub5 at uhub0 port 3 "Standard Microsystems product 0x2502" rev 2.00/0.01 addr 2 uhub6 at uhub5 port 1 "Standard Microsystems product 0x2602" rev 2.00/0.00 addr 3 umass0 at uhub6 port 1 configuration 1 interface 0 "Generic Flash Card Reader" rev 2.00/4.44 addr 4 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets sd0 at scsibus1 targ 1 lun 0: <Generic, Flash HS-CF, 4.44> SCSI0 0/direct removable sd0: drive offline sd1 at scsibus1 targ 1 lun 1: <Generic, Flash HS-COMBO, 4.44> SCSI0 0/direct removable sd1: drive offline uhidev0 at uhub6 port 4 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/20.00 addr 5 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 sd1 detached sd0 detached scsibus1 detached umass0 detached wsmouse0 detached ums0 detached uhidev0 detached uhub6 detached uhub5 detached uhub5 at uhub0 port 3 "Standard Microsystems product 0x2502" rev 2.00/0.01 addr 2 uhub6 at uhub5 port 1 "Standard Microsystems product 0x2602" rev 2.00/0.00 addr 3 umass0 at uhub6 port 1 configuration 1 interface 0 "Generic Flash Card Reader" rev 2.00/4.44 addr 4 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets sd0 at scsibus1 targ 1 lun 0: <Generic, Flash HS-CF, 4.44> SCSI0 0/direct removable sd0: drive offline sd1 at scsibus1 targ 1 lun 1: <Generic, Flash HS-COMBO, 4.44> SCSI0 0/direct removable sd1: drive offline uhidev0 at uhub6 port 4 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/20.00 addr 5 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 sd1 detached sd0 detached scsibus1 detached umass0 detached wsmouse0 detached ums0 detached uhidev0 detached uhub6 detached uhub5 detached uhub5 at uhub0 port 3 "Standard Microsystems product 0x2502" rev 2.00/0.01 addr 2 uhub6 at uhub5 port 1 "Standard Microsystems product 0x2602" rev 2.00/0.00 addr 3 umass0 at uhub6 port 1 configuration 1 interface 0 "Generic Flash Card Reader" rev 2.00/4.44 addr 4 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets sd0 at scsibus1 targ 1 lun 0: <Generic, Flash HS-CF, 4.44> SCSI0 0/direct removable sd0: drive offline sd1 at scsibus1 targ 1 lun 1: <Generic, Flash HS-COMBO, 4.44> SCSI0 0/direct removable sd1: drive offline uhidev0 at uhub6 port 4 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/20.00 addr 5 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 sd1 detached sd0 detached scsibus1 detached umass0 detached wsmouse0 detached ums0 detached uhidev0 detached uhub6 detached uhub5 detached uhub5 at uhub0 port 3 "Standard Microsystems product 0x2502" rev 2.00/0.01 addr 2 uhub6 at uhub5 port 1 "Standard Microsystems product 0x2602" rev 2.00/0.00 addr 3 umass0 at uhub6 port 1 configuration 1 interface 0 "Generic Flash Card Reader" rev 2.00/4.44 addr 4 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets sd0 at scsibus1 targ 1 lun 0: <Generic, Flash HS-CF, 4.44> SCSI0 0/direct removable sd0: drive offline sd1 at scsibus1 targ 1 lun 1: <Generic, Flash HS-COMBO, 4.44> SCSI0 0/direct removable sd1: drive offline uhidev0 at uhub6 port 4 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/20.00 addr 5 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 sd1 detached sd0 detached scsibus1 detached umass0 detached wsmouse0 detached ums0 detached uhidev0 detached uhub6 detached uhub5 detached uhub5 at uhub0 port 3 "Standard Microsystems product 0x2502" rev 2.00/0.01 addr 2 uhub6 at uhub5 port 1 "Standard Microsystems product 0x2602" rev 2.00/0.00 addr 3 umass0 at uhub6 port 1 configuration 1 interface 0 "Generic Flash Card Reader" rev 2.00/4.44 addr 4 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets sd0 at scsibus1 targ 1 lun 0: <Generic, Flash HS-CF, 4.44> SCSI0 0/direct removable sd0: drive offline sd1 at scsibus1 targ 1 lun 1: <Generic, Flash HS-COMBO, 4.44> SCSI0 0/direct removable sd1: drive offline uhidev0 at uhub6 port 4 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/20.00 addr 5 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 uvm_mapent_alloc: out of static map entries uvm_mapent_alloc: out of static map entries OpenBSD 4.3-current (GENERIC) #812: Sun Apr 13 21:52:11 MDT 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: AMD Athlon(tm) XP 2600+ ("AuthenticAMD" 686-class, 512KB L2 cache) 1.91 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real mem = 1073238016 (1023MB) avail mem = 1029693440 (981MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 07/07/04, BIOS32 rev. 0 @ 0xfb330, SMBIOS rev. 2.2 @ 0xf0800 (37 entries) bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 07/07/2004 bios0: VIA Technologies, Inc. KT600-8237 apm0 at bios0: Power Management spec V1.2 (slowidle) apm0: AC on, battery charge unknown acpi at bios0 function 0x0 not configured pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf74 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdec0/176 (9 entries) pcibios0: PCI Exclusive IRQs: 5 10 11 pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00) pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc0000/0xd000 0xd0000/0x4400! cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "VIA VT8377 PCI" rev 0x80 ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Radeon 9200 SE Sec" rev 0x01 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) agp0 at vga1: v3, aperture at 0xd0000000, size 0x10000000 "ATI Radeon 9200 SE" rev 0x01 at pci1 dev 0 function 1 not configured re0 at pci0 dev 9 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB (0x1000), irq 11, address 00:14:d1:38:79:a2 rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3 puc0 at pci0 dev 11 function 0 "NetMos 2S1P" rev 0x01: ports: 2 com, 1 lpt pccom3 at puc0 port 0 irq 11: ns16550a, 16 byte fifo pccom4 at puc0 port 1 irq 11: ns16550a, 16 byte fifo lpt3 at puc0 port 2: interrupting at irq 11 puc1 at pci0 dev 12 function 0 "Oxford OX16PCI954" rev 0x00: ports: 4 com pccom5 at puc1 port 0 irq 10: st16650, 32 byte fifo pccom5: probed fifo depth: 16 bytes pccom6 at puc1 port 1 irq 10: st16650, 32 byte fifo pccom6: probed fifo depth: 16 bytes pccom7 at puc1 port 2 irq 10: st16650, 32 byte fifo pccom7: probed fifo depth: 16 bytes pccom8 at puc1 port 3 irq 10: st16650, 32 byte fifo pccom8: probed fifo depth: 16 bytes puc2 at pci0 dev 12 function 1 "Oxford Exsys EX-41098" rev 0x00: ports: 4 com pccom9 at puc2 port 0 irq 11: ns16450, no fifo pccom10 at puc2 port 1 irq 11: ns16450, no fifo pccom11 at puc2 port 2 irq 11: ns16450, no fifo pccom12 at puc2 port 3 irq 11: ns16450, no fifo pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA pciide0: using irq 11 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <WDC WD3200KS-00PFB0> wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 wd1 at pciide0 channel 1 drive 0: <WDC WD3200KS-00PFB0> wd1: 16-sector PIO, LBA48, 305245MB, 625142448 sectors wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5 pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility wd2 at pciide1 channel 0 drive 0: <WDC WD2500JB-57REA0> wd2: 16-sector PIO, LBA48, 238475MB, 488397168 sectors wd2(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide1 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <PIODATA, DVD-RW DVR-108DX, 1.10> SCSI0 5/cdrom removable cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 4 uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 10 uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 10 uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 11 uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 11 ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 5 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1 viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00 iic0 at viapm0 spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC3200CL3.0 spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC3200CL3.0 spdmem2 at iic0 addr 0x52: 512MB DDR SDRAM non-parity PC2700CL2.5 auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 5 ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0) audio0 at auvia0 vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: irq 10, address 00:11:5b:32:0d:f7 ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 8: OUI 0x004063, model 0x0032 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1 isa0 at mainbus0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 it0 at isa0 port 0x2e/2: IT8705F rev 0x02, EC port 0x290 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask ff65 netmask ff65 ttymask ffe7 mtrr: Pentium Pro MTRR support uhub5 at uhub0 port 3 "Standard Microsystems product 0x2502" rev 2.00/0.01 addr 2 uhub6 at uhub5 port 1 "Standard Microsystems product 0x2602" rev 2.00/0.00 addr 3 umass0 at uhub6 port 1 configuration 1 interface 0 "Generic Flash Card Reader" rev 2.00/4.44 addr 4 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets sd0 at scsibus1 targ 1 lun 0: <Generic, Flash HS-CF, 4.44> SCSI0 0/direct removable sd0: drive offline sd1 at scsibus1 targ 1 lun 1: <Generic, Flash HS-COMBO, 4.44> SCSI0 0/direct removable sd1: drive offline uhidev0 at uhub6 port 4 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/20.00 addr 5 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 uhub7 at uhub0 port 5 "Genesys Logic USB2.0 Hub" rev 2.00/7.02 addr 6 softraid0 at root root on wd2a swap on wd2b dump on wd2b WARNING: / was not properly unmounted WARNING: R/W mount of /jade denied. Filesystem is not clean - run fsck