On Sat, Dec 13, 2008 at 05:28:36PM +0900, Colin Didier wrote:
> * Jacob Meuser <jake...@sdf.lonestar.org> [2008-12-13 08:07:37 +0000]:
> > On Sat, Dec 13, 2008 at 04:41:53PM +0900, Colin Didier wrote:
> > > * Jacob Meuser <jake...@sdf.lonestar.org> [2008-12-13 07:02:29 +0000]:
> > > > On Sat, Dec 13, 2008 at 03:36:35PM +0900, Colin Didier wrote:
> > > > > So I use mplayer with the following command
> > > > > env AUDIODEVICE=/dev/audio1 mplayer my_movie.avi
> > > > >
> > > > > I tried to use "aucat -l -f /dev/audio1" but it doesn't work and ends
> > > > > with the following error:
> > > > >
> > > > > /dev/audio1: Device not configured
> > > > > safile_new: can't open device
> > > >
> > > > aucat -l runs in full-duplex mode by default. you can change it to
> > > > play only with '-m play'.
> > >
> > > Oh I see. Now "aucat -l -m play -f /dev/audio1" works and there is no
> > > more stutters nor crackles in movies. But the audio sounds robotic (even
> > > using the integrated sound-card).
> >
> > that could be the effect of resampling in aucat. does it go
> > away if mplayer and aucat are running at the same rate?
>
> If I run aucat with a sample rate of 48000Hz, it solves the problem. But
> there is a bug when parsing the parameters of the command line.
>
> In these cases, it works:
> aucat -l -m play -r 48000 -f /dev/audio1
> env AUDIODEVICE=/dev/audio1 aucat -l -m play -r 48000
>
> But in this case, the sample rate is ignored:
> aucat -l -m play -f /dev/audio1 -r 48000
the parameters must be given before the device/file/socket.
Settings for the audio device can be changed using the -Ccer options.
...
The last -Ccer options specified before an -f is applied to device.
--
jake...@sdf.lonestar.org
SDF Public Access UNIX System - http://sdf.lonestar.org
