--- In [EMAIL PROTECTED], "pgregory9" <[EMAIL PROTECTED]> wrote: > > It seems that the Kodak Camera Connection Software has usurped all > the usual procedures... Not sure why they would do this. I am going > to keep trying to circumvent kodakccs.exe, just for the fun of it, > let me know if you have any ideas... > > By the way the solutions from swzoh have worked well, I'm just > curious about the weirdness of the kodak software. > > Thanks to both of you...
It turns out that the Kodak Easyshare Software did not properly uninstall itself, once I got that to properly uninstall (using a special program hidden on the Kodak website), I was able to get various event handlers to work. However, only with the Kodak software does the camera mount as a drive, so that I can move files in both directions very easily. Funny Thing is you cannot choose another event handler when Easyshare is installed---the camera connection program is locked in as the event handler. Long story short: I fixed the EasyShare Installation, so the camera mounts as a drive. But I will use the cam2pc software, which I can get to run automatically with any one of the Monitor scripts swzoh suggested. Thanks again... Paul ------------------------ Yahoo! Groups Sponsor --------------------~--> Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar. Now with Pop-Up Blocker. Get it for free! http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/JV_rlB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/power-pro/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
