The help file states this about the Key command with Ctrl Alt and
Shift
{alt}{at} Toggle Alt down or up (see note re Modifiers
above)
{shift} {sh} Toggle Shift down or up (toggles state)
{ctrl} {co} Toggle Ctrl down or up
{win} {wi} Toggle Win down or up
I read this to mean that if the state is toggled it would stay
toggled until the state is changed. This is not really the case.
I use Visio occasionaly and was always frustrated with the zoom. I
found that if you hold Ctrl and Shift down you can scroll and zoom
with the mouse. I thought that I would make this even easier and made
a mouse shortcut for Visio that sent *Keys {ctrl}{shift} for the
middle button. This doesnt have the effect of holding the keys down
that I thought it would. The cursor chages in the zoom state and I
can see it flash but it doesnt stay changed. So in effect the state
of these keys is not toggled, it is changed momentarily, the same as
tapping the key.
I didnt know if this was due to Visio, so to test further I made a
similar macro for Notepad that sent *Keys {shift}. If the state is
toggled any typing should be in caps after running this. That didnt
work either.
So is there a way to actually toggle and hold the state of these keys
with PowerPro?
------------------------ Yahoo! Groups Sponsor --------------------~-->
$9.95 domain names from Yahoo!. Register anything.
http://us.click.yahoo.com/J8kdrA/y20IAA/yQLSAA/JV_rlB/TM
--------------------------------------------------------------------~->
Attention: PowerPro's Web site has moved: http://www.ppro.org
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/power-pro/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
