Hello Davor, you wrote...
> I need to send a command to my modem and would like to do it using a > PowerPro defined Hot Key. > But, I do not how to send a command to the modem with PowerPro. > Command is at+cfun=1 > For some reason, when I put it to the normal field for sending extra > commands to the modem, my modem freaks out and refuses to connect. > Using The Hiperterminal to do it is not an acceptable solution. > Is there a solution? Maybe following utility will work for you ftp://ftp.wwiv.com/pub/modutil/MOD210A.ZIP PowerPro equivalent of following modem.doc example Command: MODEM port ATcommand Example: MODEM 1 ATH1 Action: Sends AT command to the modem and waits for OK. Returns: 0 if OK; 200 for any other response is Do("*Dos *Hide Modem 1 ATH1") Attention: PowerPro's Web site has moved: http://www.ppro.org Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/power-pro/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
