Hi, I have bought and installed a G3 250mhz Nupower processor on my pb1400cs. I notice that the original processor chip has a some heat transfer material stuck to the top, presumably to make contact with the heat sink. My question is: should I transfer this material to the G3? I have no manual, and it seems to me that there is a fairly large gap between the new chip and the heat sink. If any of you have experience with this upgrade I'd appreciate any info or suggestions you could provide, it seems to me that running a faster processor with a larger cache will create more heat, which must be dispersed efficiently. Thank you.
Simon Stone -- PowerBooks is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> PowerBooks list info: <http://lowendmac.com/lists/powerbooks.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/powerbooks%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
