on 27/03/03 22:05, Sid Barras at [EMAIL PROTECTED] wrote: > Now, I was thinking I'd use these spare 166mhz cards to upgrade some other > 1400s-- I have a 117mhz cs and a 133 mhz cs 1400s, and neither of these > machines will start up with the 166 mhz cards installed. I'm sure I've done > what I'm supposed to do-- held the on/off button down for a minute after the > changeover, and before restarting, and also tried the reset button on the > back of the unit.
Won't work and I'm not aware that anyone has found a way round it. The ROMs were changed on the 166 logic board to enable the 166 chip to work. So if you'd taken the 166 board and the 166 card you'd be ok. Best wishes Malcolm Cornelius - The Powerbook Fanatic www.pbfanatic.co.uk MSN Messenger - [EMAIL PROTECTED] ICQ - 47738640 -- PowerBooks is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> PowerBooks list info: <http://lowendmac.com/lists/powerbooks.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/powerbooks%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
