Hi all, I have a simple question that I've posted here before but the answers I got weren't model specific, so here goes again.
I'm running a Power Center 150 in a tower, utilizing a xlr8 G3/400 card and 512 mb RAM. I'm running OS 9.1 and that is quite stable. Presently I'm printing on a Epson C80 but will be upgrading to the Epson 2200p soon for my photography. I've had people tell me that a Sonnet * *G3/800 * * card will allow one to run OS X but here are my particulars ... If I buy the Sonnet * *G4/800 * *, upgrade my system to the latest MAC OS (Jaguar OS10.2?) and plan on using it with Photoshop 7.0.1 will I be able to utilize the upgrade for full speed? Is there anyone here that's using that setup on an old 150 machine? I know bus speed has a lot to do with the capability of the software and the PC 150 was set at 50mhz. I'm just cautious about spending another $400 on an upgrade when for around $1700 I can get into a MAC dual processor G4 with a bus speed in the 133mhz range. Your help is much appreciated, David � � � � � � � D A V I D C R O X F O R D http://home.earthlink.net/~photogdc [EMAIL PROTECTED] Waipio, HI -- Power Computing is sponsored by <http://lowendmac.com/> and... 123Inkjets.com <http://lowendmac.com/ad/123inkjets.html> Support Low End Mac <http://lowendmac.com/lists/support.html> Power Computing list info: <http://lowendmac.com/power/list.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://www.mail-archive.com/powercomputing%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
