Catawba uses down draft tables at L/C RCZ step off pads. Sent from Mark Helton's Blackberry device
----- Original Message ----- From: Thompson, David A [mailto:[email protected]] Sent: Thursday, April 21, 2011 12:49 PM To: [email protected] <[email protected]> Subject: Powernet: RE: Downdraft Platforms McGuire Station uses down draft tables at Step off pads. Oconee uses downdraft tables in the bullpens for S/G maintenance. They are attached to 500 cfm HEPA units. Contact me for additional info. David A. Thompson, CHP Manager Nuclear Fleet RP/Chemistry [email protected] 704-382-6773 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of BRAJUHA Zach(ZR) - BRUCE POWER Sent: Thursday, April 21, 2011 6:51 AM To: [email protected] Subject: Powernet: Downdraft Platforms Bruce Power would like to know if other utilities have had success using downdraft tables for contamination control. We are currently testing a table as a rubber change area, but there seems to be minimal draw. Has anyone found these to be effective? Is there a company that makes these tables for this specific purpose? All information is greatly appreciated. Cheers, Zachary Brajuha Radiation Protection Technician B 1-4, Bruce Power Phone: 519-361-2673 Ext. 12851 Pager: 519-370-1592 ----------------------------------- Powernet - a service of the Health Physics Society Power Reactor Section Powernet archives at http://www.mail-archive.com/[email protected]/ Reply to: [email protected] If Questions, contact Mike Russell, CHP at [email protected] ----------------------------------- Powernet - a service of the Health Physics Society Power Reactor Section Powernet archives at http://www.mail-archive.com/[email protected]/ Reply to: [email protected] If Questions, contact Mike Russell, CHP at [email protected] ----------------------------------- Powernet - a service of the Health Physics Society Power Reactor Section Powernet archives at http://www.mail-archive.com/[email protected]/ Reply to: [email protected] If Questions, contact Mike Russell, CHP at [email protected]
