From: Williams, Bill E.
Sent: Tuesday, August 30, 2011 11:46 AM
To: Bebb, Jeremy L.
Subject: RE: Low-level Spent Resin Transfers
From: Bebb, Jeremy L.
Sent: Tuesday, August 30, 2011 10:40 AM
To: Williams, Bill E.
Subject: FW: Low-level Spent Resin Transfers
Bill,
Can you answer the below questions for me?
From: [email protected] [mailto:[email protected]] On Behalf Of
PEREZ, DIANA
Sent: Tuesday, August 30, 2011 10:36 AM
To: [email protected]
Cc: FOGLE, RICHARD R
Subject: Powernet: Low-level Spent Resin Transfers
V. C. Summer would appreciate your response to the following questions
regarding low-level spent resin transfers.
If you prefer, please reply directly to Ryan Fogle at
[email protected]<mailto:[email protected]>
Thanks in advance for your assistance,
Diana Pérez
1. How is low-level spent resin transferred at your facility?
· With a resin sluice hose directly connected via camlock fitting to a
Poly HIC/CS Liner? NO
· With fill head for all types of resin transfers? Fill head, plant
installed or with the SEDS system supplied by EnergySolutions
· Other method? Please specify:
2. Does your site transfer low-level spent resin to B-25 boxes? If so,
what is the process for transferring the resin media to the boxes? NO, however
Wolf Creek Nuclear station does this routinely for their low activity secondary
side resins
3. Do your procedures capture which demin beds are used to remove
specific isotopes? No
4. What level of procedure usage do you apply to these processes?
Operations procedures are continuous use, RP procedures are information use..
