At DC Cook the procedure calls for the switch to be in the GM position.
<[email protected]> Sent by: [email protected] 02/08/2012 10:06 AM Please respond to [email protected] To <[email protected]> cc <[email protected]> Subject Powernet: RM-20 Calibration We are in the process of rewriting all RP procedures at Palo Verde. A question has risen to the method of calibration of the Eberline / Thermo RM-20 frisker. In the instrument tech manual, it references the placement of the gain switch (P/GM switch) into the P position when performing a calibration utilizing a mini pulser. Previous procedures kept the switch in the GM position during the calibration. We would like to know if your calibration procedures / process have you perform the calibration with this switch in the P position or the GM position? --- NOTICE --- This message is for the designated recipient only and may contain confidential, privileged or proprietary information. If you have received it in error, please notify the sender immediately and delete the original and any copy or printout. Unintended recipients are prohibited from making any other use of this e-mail. Although we have taken reasonable precautions to ensure no viruses are present in this e-mail, we accept no liability for any loss or damage arising from the use of this e-mail or attachments, or for any delay or errors or omissions in the contents which result from e-mail transmission. ---------------------------------------------------------------- This e-mail message and all attachments transmitted with it from the Nuclear Generation Group of American Electric Power are for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.[attachment "winmail.dat" deleted by Hal E Springer/BC1/AEPIN]
