I am looking for information concerning the replacement of plastic outer PC's for use in Hot and humid work areas to minimize the possibility of Heat Stress. I also want to consider durability while in various work areas such as under vessel shoot out steel removal, CRD de-torque and de-tensioning of the vessel head.
Ultimately I would like to use the same for other heat, wet/highly contaminated areas such as cavity decon, RHR head removal and Drywell use. Of course PCE's due to PC failure is a major concern also. I am currently looking at using OREX extremes for wet work and OREX Ultras for under vessel CRD prep work. If you have any experience concerning the use of OREX in these environments I would greatly appreciate your candid feedback. Thank you , George Scone RP/RW Shift Supervisor Browns Ferry Nuclear Plant Cell 256-434-6971 Office 256-729-3793 Email: [email protected] <mailto:[email protected]> . Chuck Creamer Charles E. Creamer Health Physicist Tennessee Valley Authority Browns Ferry Nuclear Plant P.O. Box 2000 (Mail Stop NAB-1G-BFN) Decatur, Al. 35609-2000 Phone: 256-729-2983 Fax: 256-729-3101 Pager: 1-800-323-4853, pin 30-053 mailto:[email protected] <mailto:[email protected]> This electronic message transmission contains information which may be TVA SENSITIVE, TVA RESTRICTED or TVA CONFIDENTIAL. Any misuse or unauthorized disclosure can result in both civil and criminal penalties. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the content of this information is prohibited. If you have received this communication in error, please notify me immediately by email and delete the original message.
<<image001.jpg>>
