Browns Ferry is also looking for an alternative. Trying the Bladewerx but so far have had no luck reading it remotely. It should work, but does not. Working with the vendors trying to get it to work with the WRM2 system and GEDDS. SQN had it working so I sent the unit back to them to see if it works for them. We have had no trouble with getting all other types of devices to transmit
Due to competing priorities I have not gotten to far with it, so it is probably not the device but I am missing something on the setup Chuck Creamer Charles E. Creamer Health Physicist Tennessee Valley Authority Browns Ferry Nuclear Plant P.O. Box 2000 (Mail Stop NAB-1G-BFN) Decatur, Al. 35609-2000 Phone: 256-729-2983 Fax: 256-729-3101 Pager: 1-800-323-4853, pin 30-053 mailto:[email protected] REMEMBER - You don't know what you don't know This electronic message transmission contains information which may be TVA SENSITIVE, TVA RESTRICTED or TVA CONFIDENTIAL. Any misuse or unauthorized disclosure can result in both civil and criminal penalties. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the content of this information is prohibited. If you have received this communication in error, please notify me immediately by email and delete the original message. From: [email protected] [mailto:[email protected]] On Behalf Of MCCALL, CHARLES Sent: Tuesday, October 15, 2013 8:38 AM To: [email protected] Subject: Powernet: CAM's Does anyone have any experience with the Canberra iCAM, Bladewerx A/B cam or the MGPI ABPM. We are looking to replace our AMS-4 fleet and would appreciate any peer input on the above listed units. If you do not wish to respond in this open venue please email me at the below listed email address. Thanks in advance, Charles W. McCall Health physicist Rad Equipment Group Omaha Public Power District 9710 Power Lane, Blair NE 68008 402-533-7165 [email protected] ________________________________ This e-mail contains Omaha Public Power District's confidential and proprietary information and is for use only by the intended recipient. Unless explicitly stated otherwise, this e-mail is not a contract offer, amendment, or acceptance. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.
