From Callaway. See below. Question or comments, call or email Dewey (314) 225-1061
From: [email protected] [mailto:[email protected]] On Behalf Of Denise Marie Deglopper Sent: Monday, March 23, 2015 8:25 AM To: [email protected] Subject: Powernet: Delta Suit air supply pressure question Importance: High Fermi would like feedback from our peers on Delta Suit air supply pressure: Do you have a range on the air supplied to the Mururoa MTH2 or V4F1? Yes If you have a range what is the range? 78-93 PSIG Is the range 42 PSI (3bar) to 85 PSI (6bar)? NOPE What information did you supply to the NRC to justify these numbers. Callaway "basically" filed the serial numbers off of the Progress Energy submittal. We used the 85 psig and used a tolerance of +- 10%. The EU certification testing for both shows minimum supplied inlet air pressure of 6 bar (85 PSI). Thank you, Denise DeGlopper RPO Specialist Respiratory Program Administrator DTE/Fermi 2 Work 734-586-1340 Pager 734-227-0218 The information contained in this message may be privileged and/or confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. Note that any views or opinions presented in this message are solely those of the author and do not necessarily represent those of Ameren. All e-mails are subject to monitoring and archival. Finally, the recipient should check this message and any attachments for the presence of viruses. Ameren accepts no liability for any damage caused by any virus transmitted by this e-mail. If you have received this in error, please notify the sender immediately by replying to the message and deleting the material from any computer. Ameren Corporation
