hi, what does your flowtable look like? also, do the flow statistics look correct when you send traffic between a wired host an an unwired host?
from the perspective of the OpenFlow controller, the two clients attached to wlan0 are actually on the same port, since the wireless is shared. it's akin to a setup in which you had a hub/repeater attached to one of your OpenFlow switch ports, and then attached multiple hosts to the hub. Andrew On Dec 4, 2012, at 8:05 PM, Seungwon Shin wrote: > Hello, > > I have turned Linksys router into an OpenFlow switch (Pantou project), and it > is working well. > > Currently, I enabled and added a wireless network interface to the openflow > port (wlan0), and > I connected POX to the switch (Linksys router) as a controller. > And, two hosts are connected to the wlan0 interface and send packets to each > other successfully. > > But, when I tried to flow stat information for wlan0 interface, it has not > been updated at all (always 0). > It seems that other ports for wired links are fine. > > Is this problem of the wireless interface? > > Could you give me some advice or any pointers? > > Thanks in advance
