Hi All, I have upgrade to nv_81 and the I am able to print the Photosmart 331x. I have configured the printer as follows: /usr/sbin/lpadmin -p HP -s localhost -v /dev/null -m netstandard_foomatic -A write -n /usr/share/ppd/SUNWfoomatic/HP/HP-PSC_950xi-hpijs.ppd.gz -o dest=192.168.1.210 -o protocol=tcp -o banner=never -I postscript -u allow:all /usr/sbin/lpadmin -p HP -D "HP Photosmart 3313" /usr/sbin/lpadmin -d HP /usr/bin/enable HP /usr/sbin/accept HP
Regards, Feroz > Hi Wendy, > > Apologies for not getting back to you sooner. > > I have tried your suggestions below to no avail. I am > still unable to > print to the printer. > > Any other options to try? > > Feroz > > On 09/08/07 04:19, Wendy Phillips wrote: > > Hi Feroz - > > > > Two possible things to try > > > > 1. use /usr/sbin/printmgr > > it will set some things for you > > to see what it is doing, select "Show command > line console" > > under "PrintManager" on the top screen. This will > give you the lpadmin > > commands that were used to configure the printer. > > Note that the printmgr also does the > accept/enable also. > > > > OR > > > > 2. add input type to postscript > > lpadmin -p <foobar> -I postscript > > > > note: when using tcp it's a good idea to add the > port number to the dest. > > -o dest=<IP address or machinename>:9100 > > Not all versions of Solaris will add this for > you. > > > > Let me know if this fixes your problems. > > > > -Wendy > > > > > > > > > > Feroz Khan wrote: > >> Hi Wendy, > >> > >> I am able to print text documents but am unable to > print from > >> Staroffice/Firefox/etc. > >> > >> HTH, > >> Feroz > >> > >> On 09/07/07 05:27, Wendy Phillips wrote: > >>> Can you print to it using the lp command? For > example, > >>> lp -d HP /etc/motd > >>> > >>> Feroz Khan wrote: > >>>> Hi All, > >>>> > >>>> I have a HP Photosmart 331x connected to my LAN, > however I am > >>>> unable to configure Solaris (nv_68) to print to > this printer. The > >>>> printer is similar to a PSC_950xi-hpijs. I am > using the following > >>>> command line to configure the printer: > >>>> # lpadmin -p HP -s localhost -v /dev/null -m > netstandard_foomatic > >>>> -A write -n > >>>> > /usr/share/ppd/system/foomatic/HP/HP-PSC_950xi-hpijs.p > pd.gz -o > >>>> dest=192.168.1.210 -o protocol=tcp -o > banner=always -u allow:all > >>>> # enable HP_Printer > >>>> # accept HP_Printer > >>>> > >>>> With the above, I am able to get a banner page, > but no printout if > >>>> I print from any application. Any help/tips to > debug would be > >>>> appreciated. > >>>> > >>>> Thanks, > >>>> Feroz > >>>> > >>>> > >>>> This message posted from opensolaris.org > >>>> _______________________________________________ > >>>> printing-discuss mailing list > >>>> printing-discuss at opensolaris.org > >> > >> _______________________________________________ > >> printing-discuss mailing list > >> printing-discuss at opensolaris.org > > _______________________________________________ > printing-discuss mailing list > printing-discuss at opensolaris.org This message posted from opensolaris.org
