--- Benoit Heroux <herouxb at videotron.ca> wrote:
> > What update of Solaris 10 are you using?
> > Where did you get the CUPs package from and what
> > version is it?
>
> Like i said, it is Solaris 10 U4, CUPS version 1.2.7
Yes, sorry I didn't notice that you had said that in
your original email until after sending mine - I must
have turned my brain off ready for christmas.
> I use the Cups version (CSW version) from
> blastwave.org and it is running:
> online Dec_05
> svc:/application/print/cswcups:default
>
> The foomatic_filters are v3.0.2.
>
> >
> > Try turning on the debug output in the
> foomatic-rip
> > script - print to your printer (test output) and
> look
> > at the debug log for problem
> >
> >
> > Also if that shows nothing try turning on the cups
> > logs in .../etc/cups/cupsd.conf, changing
> 'LogLevel'
> > to 'LogLevel debug' and look at the debug log for
> > problem.
> >
>
> I think i've found the problem by enable both log i
> can see:
> D [16/Dec/2007:12:06:08 +0500] [Job 38] Unknown
> device: gdi
> D [16/Dec/2007:12:06:08 +0500] [Job 38]
> Unrecoverable error: undefined in
> .uninstallpagedevice
>
> But i have version 8.57 of ghostscript. Or is it
> refer to the gdi driver ? The driver i've put in
> CUPS is: Samsung-ML-1710-gdi.ppd
I downloaded and tried this using cups (old) from the
CCD and the system's ghostscript (ESP 8.15.1 -
usr/sfw/bin/gs) and foomatics (but not to a samsung
printer) and it got passed gs okay (& output junk on
printer as expected). So is it the version of gs that
you are using with the ppd file that is the problem?
Note, s10 u4 has other ppd files for a Samsung-ML-1710
printer in /usr/lib/lp/model/ppd - you could try one
of those if you get nowhere with the one you
downloaded.
Note FYI, also for CCD cups I got the symbolic links
for foomatic-rip wrong in my previous email, it should
have been ...
# ln -s /usr/lib/lp/bin/foomatic-rip \
/opt/sfw/cups/lib/cups/filter/.
paul
