Hi Alan, Lifesaver! :)))
Thank you so much! :) Have a nice sunday! Best regards, mcc Allan Klinbail <[email protected]> [12-05-13 05:36]: > Hi Meino, > > SEQ24 has 2 different ways of working with MIDI. > > The default method is in the MIDI input page it will show all other MIDI > connections and allow you to check boxes. (This can be pretty > annoying). > > To work with qjackctl to setup the MIDI connections and have seq24 have > it's own input follow these steps. > > 1. Open then close seq24. > 2. Open up the file .seq24rc > 3. Find the section that looks like > > [manual-alsa-ports] > # set to 1 if you want seq24 to create its own alsa ports and > # not connect to other clients > 0 > > > 4. and make it look like this > > > [manual-alsa-ports] > # set to 1 if you want seq24 to create its own alsa ports and > # not connect to other clients > 1 > > 5. Reopen SEQ24 and you should see a MIDI port under the ALSA section > (it doesn't support jack MIDI although using a2jmidid -e will expose all > ALSA sequencer ports in JACK) > > > cheers > > Allan > > > > > > On Sat, 2012-05-12 at 13:31 +0200, [email protected] wrote: > > Hi, > > > > the last days I tried to connect SEQ24 and Zynaddsubfx via jackd > > (1.9.8)/qjackcontrol (0.3.8). It fails. > > First thing is: I cannot see anything seq24-like in qjackctrl. > > I additionally run hydrogen. > > When pressing the playu-button in seq24, hydrogen starts playing > > its demo. > > But Zynnaddsubfx only please "The Sound of Silence" ;/ > > > > Regardless what kind of midi connection I did: No sound. > > Using the virtual keyboard of Zynaddsubfx works find...so > > the audio connection is alive. > > > > What kind of magic I need to get this working? > > > > Thank you very much in advance for any help! > > Best regards, > > mcc > > > > . > > > > > > > > > >
