Richard
On 12/12/02 at , Richard Lewisohn wrote:
> It's the first time I've printed A3 on my Epson 1160 and there is what
> appears to be some kind of pressure mark, presumably from a roller that is
> outside the A4 area (which is why I hadn't seen it before. I'm printing on
> Lyson smooth fine art with Fotonic inks. Depending on what angle I hold the
> print I can see a thin (1mm thick?) line running vertically through the
> print that is only visible in the dark areas. Almost as if that part of the
> matte paper has become 'glossier'; had it's surface pushed down to make it
> smoother and therefore reflective.
just in case try inverting the image and printing again.
>
>
> P.S. This is a somewhat embarrassing extra question, but is it true that no
> increase in quality will be seen on an inkjet printer if the printed file's
> resolution is more that 240dpi?
that's what I found when I tried it.
240 is a lot better than 300 for obvious reasons.
ps sorry to miss you at ME's talk last week.
Regards
NeilB
- - - - Consulting in Imaging & Colour Management - - - -
custom scanner and printer profiles, training on Trident & Imacon Scanning
- - - - - we supply Gretag and eyeOne, also XRite & OptiCal - - - - - -
p:44 (0)1273 774704 m:44 (0)7778 160201 http://www.neilbarstow.co.uk/
http://www.apple.com/uk/creative/neilbarstow/
===============================================================
GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
