Alllll righty...I think I have a solution.
Basically, I am creating an array of unique info (same salesrep data as
the Group-by on the report) and then running the report once for each
salesrep with the NOPAGEEJECT option on REPORT FORM. Works well, both
when doing a screen preview and when outputting to PDF (using XFRX.)
Might take a few extra seconds, but hey...
I'm now having issues with a WAIT NOWAIT window popping up stating
"Running calculation prepass"...which is not a deal breaker, but
annoying. I've tried SET TALK OFF and SET CONSOLE OFF but those seem to
be ignored by the reportlistener engine.
If anyone has an ideas how to suppress those pop-up messages, I'm
anxious to hear them!
Thanks, Kevin, for a nudge in the right direction. Calling a function to
update the source table from the group footer band may have worked for
some folks, but it acted bad for me!
Mike Copeland
Kevin Cully wrote:
Hey Mike,
I had to load up VFP Help to try to get on track with what you are
saying but I'm thinking of a couple of possible solutions:
1. There's a way of chaining reports together. You could run a report
for each sales person, but chain them together so it runs them and
they appear as one print job. I haven't ever really done this but
it's worth looking into. Look into the REPORT FORM ... [NOPAGEEJECT]
and [NOEJECT] options to see which ones will apply. I like the thought
of this approach as you're using the 'natural' report behavior, you're
just creating multiple reports programmaticly.
2. Another possible solution would be to pre-calculate how many
records will show per page, and then pre-populate a page number field,
and a page total field in the dataset before feeding the data to the
report itself. This would be reliant on a simple report layout. (No
stretching memo fields to mess things up, etc.)
3. You could do something crazy with the report listener, that would
run the report first to help you calculate the page totals per
salesperson, and then run the report again out to PREVIEW or the
normal output. This seems pretty complicated and would increase the
time that is needed to get the report output, but if this is what they
want, then it's an option. I used to do some of this but it has been a
very very long time and has been lost in the fog of my memory. Some
experimentation would tell you what is feasible.
Good luck and tell us how things progress along.
-Kevin
On 07/17/2014 05:28 PM, Mike Copeland wrote:
Executive Summary:
Anyone have a solution for "Page X of XX" where XX is reset when the
group-by changes on a VFP report?
Mike Copeland
Mike Copeland wrote:
All,
I have a report of sales grouped by Sales Person.
The page # resets as the group (Salesperson) changes... "Page 1"
"Page 2" "Page 1" etc. Works great.
My client wants it to show "Page 1 of 2" "Page 2 of 2" and then when
the group/salesperson changes, "Page 1 of 3" "Page 2 of 3" as
appropriate.
Using the "_PageTotal" system variable for an entire report works fine.
VFP does a double-run of the report to get the total # of
pages...not a problem.
But there's no way to reset it on the Group break (that I know of.)
So I Googled a "solution" for the Group _PageTotal problem, and it
works on my development computer.
When I run it on the client's workstation, it has a problem...I get
"File Not Found" when the function is called.
The solution I'm using is:
1. add a function call in the group footer band, i.e.,
"countpages(staffname,_pageno)"
2. add a column in the report source table "reportsource" to contain
the group page count, "ofpages"
3. create a function (I put it in my main startup application but it
works as a method on the calling form, too)
function countpages
parameter pStaffName, pOfPage
update dbf("reportsource") set OfPages = pOfPage where
allt(staffname)=allt(pStaffName)
return ''
endfunc
The problem is that when run on client's system (Win XP or Win7) I
get a "File not found" referring to the reportsource table reference
in the function call. It also includes a randomly generated file
name... due to reportsource being a cursor.
What I've tried:
1. Changed the reportsource from a cursor to a table
Select yadda yadda into TABLE reportsource (instead of
"into CURSOR reportsource")
This DID eliminate the "file not found" problem, but it also
caused the function to "fail" after just a few calls. In other
words, it acted okay, but the reportsource table only had about 7 of
the 1,500 records updated (the ofpages field). The rest were still
set to 0 (what they were initialized as.)
2. I moved the function from the main application file to a method
on the form that initiates the report activity.
No change.
3. I tried setting the datasession in the calling form, and in the
CountPages function.
No change. The datasessions are the same (based on WAIT windows
I added to popup and indicate the datasessionid at various steps.)
4. I double-checked the "Temp" workfile settings. Still not 100%
sure this is not the source of the problem.
I'm at a loss. Any ideas or is anyone successfully using a
workaround for the group+_pagetotal problem? I've read several
articles, including one by Cathy Pountny. Nothing so far...
Thanks for any pointers!
Mike Copeland
[excessive quoting removed by server]
_______________________________________________
Post Messages to: ProFox@leafe.com
Subscription Maintenance: http://mail.leafe.com/mailman/listinfo/profox
OT-free version of this list: http://mail.leafe.com/mailman/listinfo/profoxtech
Searchable Archive: http://leafe.com/archives/search/profox
This message:
http://leafe.com/archives/byMID/profox/53c99f67.2040...@ggisoft.com
** All postings, unless explicitly stated otherwise, are the opinions of the
author, and do not constitute legal or medical advice. This statement is added
to the messages for those lawyers who are too stupid to see the obvious.