<snip> Should I be able to run code that I copy from the View Code button in Class Designer? Would posting it here let others help determine whether my errors are a result of a corrupted system or my own bugs? </snip>
I usually have not been able to get that code to run the first time. Especially if it contains a subclass that isn't referenced. Posting that code here could help, it could also distract from the actual problem. When you need to share forms and class libraries, sharing sample code in a public source control system like a github repository may be the easiest. Tracy -----Original Message----- From: ProfoxTech [mailto:[email protected]] On Behalf Of Joe Yoder Sent: Thursday, July 11, 2024 9:16 AM To: [email protected] Subject: Re: Class code issue Thanks Tracy - very helpful as usual! Essentially to make my code work you added the objects to the container and then configured them instead of trying to configure them before adding them to the container. Your solution is so much more elegant! Now some additional questions: Is it essential to have a separate method to Add Controls or can it be done in the Init method? (The separate method in the original code was added to try to eliminate the error.) Should I be able to run code that I copy from the View Code button in Class Designer? Would posting it here let others help determine whether my errors are a result of a corrupted system or my own bugs? Thanks in advance, Joe On Wed, Jul 10, 2024 at 11:43 PM Tracy Pearson <[email protected]> wrote: > Hi Joe, > > VFP isn't able to add an existing object to the form to be displayed. > It instantiates an object on the form with the AddObject or NewObject > commands. > When you add an object this way it will not display until you set the > Visible property. > > I have two examples below. > > Here is how that code could be written: > * Create a blank form > loMyForm = CREATEOBJECT("Form") > > MESSAGEBOX("Form created successfully") > > > * Add the spotpick1 to the form > loMyForm.AddObject("SpotPick1", "spotpick1") > loMyForm.SpotPick1.Visible = .T. > > * Show the form, in a Modal state > loMyForm.Show(1) > > RETURN > > DEFINE CLASS spotpick1 AS container > WIDTH = 100 > > PROCEDURE Init > * Add your custom logic here (e.g., create controls, set > properties) > THIS.AddControls() > ENDPROC > > PROCEDURE AddControls > * Add a textbox to the container > THIS.AddObject("Textbox1", "TextBox") > THIS.Textbox1.Value = "Hello from TextBox 1" > THIS.TextBox1.Visible = .T. > * Add a second textbox to the container > THIS.AddObject("Textbox2", "TextBox") > THIS.Textbox2.Value = "Hello from TextBox 2" > THIS.TextBox2.Visible = .T. > THIS.Textbox2.Top = 30 > ENDPROC > ENDDEFINE > > Here is an example of defining the classes in a prg and using it in a form > class two ways > > * Create class form > loMyForm = CREATEOBJECT("FormClass") > > * Show the form > loMyForm.Show() > > RETURN > > * Define the customized container > DEFINE CLASS spotpick1 AS container > WIDTH = 200 > ADD OBJECT Textbox1 as TextBox WITH Value = "Hello from TextBox 1", > Width = 200 > ADD OBJECT Textbox2 as TextBox WITH Value = "Hello from TextBox 2", > Width = 200, Top = 30 > > ENDDEFINE > > > * define the customized form > DEFINE CLASS formclass as Form > WindowType = 1 > > ADD OBJECT spotpick1 as spotpick1 > > PROCEDURE init > This.AddSecondContainer() > ENDPROC > > PROCEDURE AddSecondContainer > This.AddObject("spotpick2", "spotpick1") > This.spotpick2.top = 100 > This.spotpick2.visible = .T. > ENDPROC > ENDDEFINE > > HTH, > Tracy > > > -----Original Message----- > From: ProfoxTech [mailto:[email protected]] On Behalf Of Joe > Yoder > Sent: Wednesday, July 10, 2024 10:02 PM > To: [email protected] > Subject: Class code issue > > I am developed a custom class based on a container that worked properly > when it was on a form but when I converted it to a class I have issues I > can't resolve. I have only one installation of VFP and sometimes I wonder > if it might be corrupt. > > In order to avoid any corruption of the visual tools I have attempted to > come up with a small .prg program that creates a form, defines a custom > class in code, and puts an instance of the class on the form. > ,The following code was written by Microsoft's CoPilot but the author has > not been able to make it work! > The problem seems to be that the definition code needs to reference the > class before it is instantiated. > > * Create a blank form > loMyForm = CREATEOBJECT("Form") > > MESSAGEBOX("Form created successfully") > > * Create an instance of your spotpick1 class > loSpotPick1 = CREATEOBJECT("spotpick1") > > MESSAGEBOX("Class created successfully") > > * Add the spotpick1 to the form > loMyForm.AddObject("SpotPick1", loSpotPick1) > > * Show the form > loMyForm.Show() > > RETURN > > DEFINE CLASS spotpick1 AS container > PROCEDURE Init > * Add your custom logic here (e.g., create controls, set > properties) > THIS.AddControls() > ENDPROC > > PROCEDURE AddControls > LOCAL oTextbox1, oTextbox2 > oTextbox1 = CREATEOBJECT("TextBox") > oTextbox2 = CREATEOBJECT("TextBox") > oTextbox1.Value = "Hello from TextBox 1" > oTextbox2.Value = "Hello from TextBox 2" > THIS.AddObject("Textbox1", oTextbox1) && Errors here > THIS.AddObject("Textbox2", oTextbox2) && Errors here > ENDPROC > ENDDEFINE > > Thanks in advance for any help! > Joe > > > --- StripMime Report -- processed MIME parts --- > multipart/alternative > text/plain (text body -- kept) > text/html > --- > [excessive quoting removed by server] _______________________________________________ Post Messages to: [email protected] Subscription Maintenance: https://mail.leafe.com/mailman/listinfo/profox OT-free version of this list: https://mail.leafe.com/mailman/listinfo/profoxtech Searchable Archive: https://leafe.com/archives This message: https://leafe.com/archives/byMID/[email protected] ** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
