Can you ping it? Is your firewall on? --- On Mon, 12/1/08, Joe Yoder <[EMAIL PROTECTED]> wrote:
> From: Joe Yoder <[EMAIL PROTECTED]> > Subject: Re: [NF] Using a D-Link wireless router as an Access Point > To: profox@leafe.com > Date: Monday, December 1, 2008, 8:09 PM > My configuration uses only the wireless and switch parts of > the box. > When working as a router, the WAN port is in use with > Network Address > Translation (NAT) that shares the IP address of the WAN > port with switch > ports and the Wireless Access Point. The DHCP server gives > out IP > addresses in the range it is configured to use. I am not > using the > D-Link's WAN port, its NAT function or its DHCP server. > > Same question - why does the wireless link behave > differently from the > copper one? How can I get the wireless link to talk to > 10.0.0.200? > > Joe > > On Monday, December 01, 2008 7:04 PM, Michael Madigan > wrote: > > > >Date: Mon, 1 Dec 2008 16:04:56 -0800 (PST) > >From: Michael Madigan > >To: [EMAIL PROTECTED] > >cc: > >Subject: Re: [NF] Using a D-Link wireless router as an > Access Point > > > >The wireless router "routs" the one IP > connection on the one side of the box to multiple IP > connections on the other side of the box, that seemed to be > your initial problem. > > > >I wonder if you have to forward the print server port > to the wireless router clients. > > > > > > > >--- On Mon, 12/1/08, Joe Yoder > <[EMAIL PROTECTED]> wrote: > > > >> From: Joe Yoder <[EMAIL PROTECTED]> > >> Subject: Re: [NF] Using a D-Link wireless router > as an Access Point > >> To: profox@leafe.com > >> Date: Monday, December 1, 2008, 6:56 PM > >> Michael, > >> > >> Thanks for your initial response and the second > post asking > >> if I got it > >> working. The answer is - Partially. > >> > >> I read the URL you provided and turned off the > >> miscellaneous things that > >> I don't know that I need. Since doing so I > can access > >> the other router > >> at 10.0.0.254 so I can surf, but I still can't > access > >> the print server at > >> 10.0.0.200. I was going to use the wireless > connection > >> today to see if > >> the router stays accessible but needed to print > something > >> so went back to > >> a copper link. Now I'm back on wireless and > still able > >> to surf. > >> > >> I don't understand why the wireless connection > should > >> behave any > >> differently than the wired connections. I > wondered if the > >> D-Link was > >> having problems with the high numbers of the range > but I > >> set its static > >> IP address to 10.0.0.253 and it works okay there. > >> > >> The obvious place to blame is the print server > itself. It > >> is actually a > >> wired SMC Barricade Router used as a switch and > print > >> server. It works > >> fine with all my equipment including an Ubuntu > box. The > >> laptop works > >> with it via copper or wirelessly via a Deliberant > box. It > >> works with the > >> D-Link via copper but fails wirelessly. > >> > >> I don't have a clue how to troubleshoot this. > Perhaps > >> I should connect > >> the DLink as a router and see if the wireless side > can > >> access the print > >> server that way. > >> > >> Joe > >> > >> On Saturday, November 29, 2008 8:09 PM, Michael > Madigan > >> wrote: > >> > > >> >Date: Sat, 29 Nov 2008 17:09:00 -0800 (PST) > >> >From: Michael Madigan > >> >To: [EMAIL PROTECTED] > >> >cc: > >> >Subject: Re: [NF] Using a D-Link wireless > router as an > >> Access Point > >> > > >> >You have to make sure you're not > overlapping the ip > >> addresses. > >> > > >> > > >> >http://www.dslreports.com/faq/11233 > >> > > >> > > >> > > >> >--- On Sat, 11/29/08, Joe Yoder > >> <[EMAIL PROTECTED]> wrote: > >> > > >> >> From: Joe Yoder <[EMAIL PROTECTED]> > >> >> Subject: [NF] Using a D-Link wireless > router as an > >> Access Point > >> >> To: profox@leafe.com > >> >> Date: Saturday, November 29, 2008, 7:19 > PM > >> >> I am using a D-Link DI-524 as an access > point on a > >> network > >> >> that already has a NAT router to the > Internet as > >> well as > >> >> DHCP and DNS servers in another box. The > device is > >> setup > >> >> with a static IP address and connected to > the LAN > >> via one of > >> >> the LAN ports. > >> >> > >> >> When my laptop is plugged into one of the > LAN > >> ports it is > >> >> able to access a print server at > 10.0.0.200 and > >> the other > >> >> router at 10.0.0.254 along with the file > server at > >> 10.0.0.1 > >> >> and a work station at 10.0.0.14. > >> >> > >> >> When the laptop is connected over the > wireless > >> link, It > >> >> usually cannot access the router or print > server > >> (Request > >> >> timed out) but can access the file server > and > >> other > >> >> workstation. To complicate things further > there > >> have been > >> >> several times when the router at > 10.0.0.254 has > >> temporarily > >> >> been accessible over the wireless link. > >> >> > >> >> I have used this same configuration with > other > >> wireless > >> >> routers without a problem. I Emailed > D-Link > >> support and > >> >> they wanted me to talk to a technician. > When I > >> did so, I > >> >> was told I need to call another number > and pay for > >> advanced > >> >> support. > >> >> > >> >> Does someone have an idea about what > could be > >> causing this > >> >> behavior? Suggestions for a workaround? > >> >> > >> >> Thanks in advance, > >> >> > >> >> Joe Yoder > >> >> > >> >> > >> >> --- StripMime Report -- processed MIME > parts --- > >> >> multipart/alternative > >> >> text/plain (text body -- kept) > >> >> text/html > >> >> --- > >> >> > >> >> > _______________________________________________ > >> >> Post Messages to: ProFox@leafe.com > >> >> Subscription Maintenance: > >> >> http://leafe.com/mailman/listinfo/profox > >> >> OT-free version of this list: > >> >> > http://leafe.com/mailman/listinfo/profoxtech > >> >> Searchable Archive: > >> http://leafe.com/archives/search/profox > >> >> This message: > >> >> > >> > http://leafe.com/archives/byMID/profox/[EMAIL PROTECTED] > >> >> ** All postings, unless explicitly stated > >> otherwise, are > >> >> the opinions of the author, and do not > constitute > >> legal or > >> >> medical advice. This statement is added > to the > >> messages for > >> >> those lawyers who are too stupid to see > the > >> obvious. > >> > > >> > [excessive quoting removed by server] _______________________________________________ Post Messages to: ProFox@leafe.com Subscription Maintenance: http://leafe.com/mailman/listinfo/profox OT-free version of this list: http://leafe.com/mailman/listinfo/profoxtech Searchable Archive: http://leafe.com/archives/search/profox This message: http://leafe.com/archives/byMID/profox/[EMAIL PROTECTED] ** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
