According to
https://code.jsoftware.com/wiki/Guides/Qt_IDE/Configure/User_Keys those
fields should be set for modes 0 and 1. I know they used to work for me
and I never used mode 1.
Henry Rich
On 12/16/2020 11:39 AM, bill lam wrote:
Ah I remember, those 2 names are available under mode 1, ie, put 1 instead
of 0 in the configuration for the PFKey.
Can you try and confirm it can work first?
On Thu, Dec 17, 2020, 12:27 AM 'robert therriault' via Programming <
[email protected]> wrote:
Hi Bill,
I don't use debug a lot, but my understanding is that if I was in
suspension mode then there would be an additional 3 space indent for each
new line. If this is true then I was not in suspension mode when I pressed
the keys.
This is the result that I get when I press the F6 key which is my User
Defined Key for the Jig Augmented display
|noun result was required: findline_jig_
| (#~-.@:(*./\)@:=&'
')":({.WinSelect_jqtide_)((LF&taketo&.|.)@:{.,LF&taketo@:}.)7
u:WinText_jqtide_
|[-0]
When I check the names defined in the jqtide locale using names_jqtide_ ''
I don't see either WinSelect or WinText, so my guess is that the
interpreter is seeing them as undefined verbs and that is the reason for
the lack of a noun result.
Thanks for your help in this and let me know if there is anything further
that you need me to do.
Cheers, bob
On Dec 16, 2020, at 08:10, bill lam <[email protected]> wrote:
Bob,
I checked those 2 names should had been set in non suspension mode.
Was your PFkey pressed during suspension mode?
On Wed, Dec 16, 2020, 12:13 PM 'robert therriault' via Programming <
[email protected]> wrote:
Just a follow-up Bill,
Comparing the results of names_jqtide_ '' for the two versions j901 and
j902, the only differences that I see are WinSelect_jqtide_ and
WinText_jqtide_ not being in j902
Cheers, bob
On Dec 15, 2020, at 18:20, 'robert therriault' via Programming <
[email protected]> wrote:
Hi Bill,
WinSelect_jqtide_ and WinText_jqtide_ are the only two names that I
have
used for jig's User Defined Keys.
Henry probably has a better sense of whether dissect requires any
others
for its User Defined Keys to activate the application on the line which
holds the cursor.
Cheers, bob
On Dec 14, 2020, at 14:57, bill lam <[email protected]> wrote:
Are globals WinText_jqtide_ and WinSelect_jqtide_ the only names that
will
be referenced by addons or other users scripts?
On Tue, Dec 15, 2020, 12:14 AM Henry Rich <[email protected]>
wrote:
The fields used by pfkeys are described in
https://code.jsoftware.com/wiki/Guides/Qt_IDE/Configure/User_Keys
Henry Rich
On 12/14/2020 10:56 AM, 'robert therriault' via Programming wrote:
Thanks Bill,
This is the verb that I modified from Henry's invocation of dissect.
findline =: 3 : 0 NB. WinSelect is a character index; WinText is
entire window; if window contains non-ASCII, convert to unicode
if. y do. ; }. ;:(#~ -.@:(*./\)@:=&' ') ": > {: < ;. _2 (wd'sm get
inputlog'), LF NB. pull the last line only for the monadic case
Programmatic version strip off first word which would be invoking
verb
else. (#~ -.@:(*./\)@:=&' ') ": ({. WinSelect_jqtide_)
((LF&taketo&.|.)@:{. , LF&taketo @:}.) 7 u: WinText_jqtide_ end.NB.
The
line that the cursor is on if 0 - Function key version
)
I believe that WinSelect_jqtide_ is the other name that is used that
may
be affected.
Cheers, bob
On Dec 13, 2020, at 23:50, bill lam <[email protected]> wrote:
understood. There are some undocumented names or that I failed to
notice
inside the source of qtide frontend. Those names are not refernced
insude
the frontend itself so I didn't handle them. Are there any other
special
names that you are using?
On Mon, Dec 14, 2020, 3:36 PM 'robert therriault' via Programming <
[email protected]> wrote:
Thanks Bill,
In jig, coname '' returns the locale that you are in when when you
invoked
jig.
I have tested it in both the jig 901 and jig 902 versions and the
result
of coname '' confirms this.
I have also noticed that WinText_qtide_ is no longer defined
WinText_jqtide_
|value error: WinText_jqtide_
Since I use that to select the information from the line that the
cursor
is on, it is quite possible that this is the source of the
problem.
Is
there a reason that WinText_jqtide_ would not be defined?
JVERSION
Engine: j902/j64avx2/darwin
Release-a: commercial/2020-12-05T12:43:38
Library: 9.02.08
Qt IDE: 1.9.1/5.12.10(5.12.10)
Platform: Darwin 64
Installer: J902 install
InstallPath: /users/bobtherriault/j902
Contact: www.jsoftware.com
Cheers, bob
On Dec 13, 2020, at 22:12, bill lam <[email protected]> wrote:
I'm unfamiliar with dissect and PFkey.
PFkey behaves differently under suspension mode or not.
Your syntax seems correct. IIRC when running under non suspension
mode,
commands are executed as a script with empty stack. Can you check
what is
the value of coname'' when calling PFKey?
On Mon, Dec 14, 2020, 1:38 PM 'robert therriault' via
Programming <
[email protected]> wrote:
J902 is up and running on my system. Thank you to the team for
all of
the
work that goes into this process. I hope that you all have a
relaxed
holiday season after so much work.
One question. Now that the issue with PF keys has been fixed,
what is
the
process for assigning applications like dissect to PF keys. The
previous
approach described in the wiki results in
|noun result was required: finddissectline_dissect_
| 1<#~.fs
|[-0]
The wiki suggests using
F2;0;Dissect Line;dissect&.finddissectline_dissect_ 0
I use this for my jig augmented display
F6|0|Jig Augmented Display|((1 ; coname '') visual_jig_ 0)
and it returns a similar result.
Any suggestions that you have would be welcome.
Cheers, bob
On Dec 13, 2020, at 15:36, Henry Rich <[email protected]>
wrote:
The new version of JQt does not require the ugly workaround for
PFkeys
in debug that the previous version required.
Henry Rich
--
This email has been checked for viruses by AVG.
https://www.avg.com
----------------------------------------------------------------------
For information about J forums see
http://www.jsoftware.com/forums.htm
----------------------------------------------------------------------
For information about J forums see
http://www.jsoftware.com/forums.htm
----------------------------------------------------------------------
For information about J forums see
http://www.jsoftware.com/forums.htm
----------------------------------------------------------------------
For information about J forums see
http://www.jsoftware.com/forums.htm
----------------------------------------------------------------------
For information about J forums see
http://www.jsoftware.com/forums.htm
----------------------------------------------------------------------
For information about J forums see
http://www.jsoftware.com/forums.htm
--
This email has been checked for viruses by AVG.
https://www.avg.com
----------------------------------------------------------------------
For information about J forums see
http://www.jsoftware.com/forums.htm
----------------------------------------------------------------------
For information about J forums see
http://www.jsoftware.com/forums.htm
----------------------------------------------------------------------
For information about J forums see http://www.jsoftware.com/forums.htm
----------------------------------------------------------------------
For information about J forums see http://www.jsoftware.com/forums.htm
----------------------------------------------------------------------
For information about J forums see http://www.jsoftware.com/forums.htm
----------------------------------------------------------------------
For information about J forums see http://www.jsoftware.com/forums.htm
----------------------------------------------------------------------
For information about J forums see http://www.jsoftware.com/forums.htm
--
This email has been checked for viruses by AVG.
https://www.avg.com
----------------------------------------------------------------------
For information about J forums see http://www.jsoftware.com/forums.htm
