hello,
this is just a comment post and not a question.
i wrote about a month ago about a problem i was having with not
being able to assign multiple names to the same net. although
this sounds like an unreasonable, unnecessary, and dubious
practice, it was actually the result of a simple attempt to redraw
a non-protel schematic into protel.
i had the connectors all on the last page, and i used global nets
to connect them to the other pages. well, on page 1 there were
several pins tied to ground. when i tied several of the global nets
that represented these pins to ground, i noticed in the netlist that
all were deleted but one. the reason is that you can only have
one name assigned per net.
it was suggested that i just attach them as non-schematic com-
ponents, but i feared complications from this approach.
what i'm thinking about doing is dispensing with the connectors on
the last page, making the connectors into multi-part components
with each pin as a part, and doing it that way. its a trade-off really.
a component with a hundred parts is something of a mess. the
alternative was to break from the older schematic's layout and just
tie those pins to ground on the final page of connectors.
thank you, miker
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *