OK Here is the scenario, I ran through this today. Hopefully I have described it clearly enough. I am running 99SE, SP6 on WIN98 Second Ed. Using the Database structure.
Create 3 footprints called KP1, KP2, & KP3 that could be used for this part in a library, Create a part for a contact pattern for a keypad in a library. Part named "KEY" In that part I have defined KP1, KP2 & KP3 as legal footprints for that part, KP1 the 1st on the list then KP2, then KP3. With the above scenario I have two problems, 1 on the schematic update side and the other on the PCB update side. I create a new schematic put these parts on it and connect them up. Then I annotate. Then I run update PCB. Once in the board I see that the footprint that came out on the board is the first one on the list (KP1) in the part in the library. Later on at some point I need to change this footprint, I don't want the same name because it is physically different but I still want to keep the old footprint even though I do not want it used for this part anymore. So I create the new footprint KP4 and edit the library for the part KEY to use only KP4 as a footprint, while both databases for board and library are open. While editing the part in library I select update schematic. Save then go in to schematic, hit part properties and guess what the old footprint, KP1, is what is listed, I can then select the arrow pulldown and see there is a choice for KP4 and once selected it now becomes the only choice for that part. But that means every unique part needs a global update, that's allot of needless work in my mind. Schematic Problem: Problem here is each unique part needs to be touched separately and then globally updated to REALLY change the footprint. Other wise the old footprint will get put on the board. And yes you could then change it in the board but why I already supposedly updated it in the schematic. Seems like allot of extra useless work. In my opinion the update schematic function does not work properly, don't know whether Protel intends it to work this way or if it is a bug. You might as well not have this update feature if it will not change this data in the schematic globally for you automatically. Now for one or two parts this may not be that much extra work but if your library structure needs to change drastically this is a major issue. Especially in a service bureau environment. PCB Problem: Back to the part that calls out 3 footprints that can be used. "KEY" has all 3 footprints listed as legal footprints, and ALL 3 are in fact used on a board. I go ahead and change the specific ones as needed to KP1, KP2 & KP3 in the PCB. Now I realize I have to make some changes to many other parts in the footprint library at some point. Which would then logically say that I would want to update footprints next time I run the synchronizer on this board. However what happens is ALL of the parts on the board that are "KEY" change back to KP1, which was the 1st one on the list in the part in the library. This is not a good thing in my mind. In my opinion again this does not work properly. If Protel is giving you the ability to specify other legal footprints for a part then when you run an update function it should not remove those alternate legal footprints, but just update them to the latest that is in the library. Again why have this update function and the ability to define alternate footprints in the part, if it will not leave alone a footprint that was defined in that part in the library. Now I suppose you could keep track of every footprint you update and do them individually, but why. The software should do this. Also people mentioned I could change the footprints on the board side and back annotate, however this is a new board there are no footprints in it yet. So one would need to have some sort of old footprints there but then again allot of extra work. One last statement, this all stems from my need & want to import an Orcad schematic with footprints names on the parts that I do not wish to use. Therefore I would have thought the update schematic would have worked properly and forced the footprints defined in my library to be placed on a new PCB. The PCB problem is less of an issue because I have just went ahead and made 3 separate parts defining the 3 keypads so it will not rip them up when I need to update footprints during synchronization. But it still bugs me that the alternate footprints do function as I would expect. Again not sure if this is a bug still or whether Protel intends it to work this way. Hopefully I have defined this issue clear enough for everyone, I really feel these are two major issues in the way Protel functions with respect to updates, both Schematic and PCB. Even if Protel wanted you not to be able to globally update footprints as a default in the schematic there could at least be a few options of how the update function operates. Is anyone trying to use Protel in this fashion for update? If that is the way it is, I can still get the job done, but there really is way too much extra work involved. Thanks Bob Robert M. Wolfe, C.I.D. [EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
