I have to agree with Gisbert, we simply place the logo in one spot and leave it there...it has always worked properly. I too scratch my head at the problems reported with it. All I can say is use a full path.
-Frank At 10:31 AM 7/3/2002 +0200, Gisbert Auge wrote: >I have been following this thread (and others on the same topic before) >with some astonishment. I placed a .TIF file with our company logo on the >schematic templates long time ago, which is stored in only one location, >far away from any protel files, and it just works fine with any project I >have been doing since. There has never been any problem whatsoever with >this feature. It is a local drive, though, where the graphic is located, >not a network drive. WIN2K and P99SE SP6 (like most of you). > >Gisbert Auge >N.A.T. GmbH >www.nateurope.com Frank Gilley Dell-Star Technologies (918) 838-1973 Phone (918) 838-8814 Fax [EMAIL PROTECTED] http://www.dellstar.com ************************************************************************ * Tracking #: 2B084D2F8CBCE64DA5BEDA182F57654BE26DE12B * ************************************************************************ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
