FORGOT, go straight to Matrox -> http://firingsquad.gamers.com/hardware/parhelia/page5.asp > Do you know how the 200 NVS differs from the 550XGL card (both are > Quadro4-based). There is no good (detailed) info on these cards > capabilities - in particular the options for driving mix-and-match LCD+CRT, > CRT+CRT, LCD+LCD is not well defined. I think the 550XGL is clear enough > that it can either do CRT+CRT or LCD+LCD, no mixing.
Take a look at this new Matrox video card. http://firingsquad.gamers.com/hardware/parhelia/ http://firingsquad.gamers.com/hardware/parheliapreview/ I've seen a prototype (friends at matrox, the R&D headquarters is 5 minutes from my house), but not on 1 of my monitors. The video is significantly better, maybe 3 times better than anything I've seen to date. I did scope the analog out from the VGA adapter, and I must say that it clearly kicks ass compared to anything I've seen to date. If it was at my office, I would have provided a scope shot from my TDS3054 5GS/s scope with differential buffered probes, but you may have to wait a month or 2 for that. (The true 30 bit video kicks ass, and no silly r-g-b channel cornstalk like all NVIDIA cards, which only have 42db r-g-b channel isolation). Only flaw, you can only go up to 3 monitors instead of 4. ____________ Brian Guralnick [EMAIL PROTECTED] ____________ Brian Guralnick [EMAIL PROTECTED] Voice (514) 624-4003 Fax (514) 624-3631 ----- Original Message ----- From: "Tony Karavidas" <[EMAIL PROTECTED]> To: "Protel EDA Forum" <[EMAIL PROTECTED]> Sent: Wednesday, July 17, 2002 2:17 PM Subject: Re: [PEDA] Hardware questions (upgrade time - yuk!) > That card looks impressive. The person who wrote the review should fix this: > from http://firingsquad.gamers.com/hardware/parhelia/page5.asp > > "Thanks to the design of its analog filters, Matrox is betting its money > that no other card will produce the same high-fidelity images - and to a > great extent they is right." > > > > > > > > -----Original Message----- > > From: Brian Guralnick [mailto:[EMAIL PROTECTED]] > > Sent: Wednesday, July 17, 2002 10:39 AM > > To: Protel EDA Forum > > Subject: Re: [PEDA] Hardware questions (upgrade time - yuk!) > > > > > > > Do you know how the 200 NVS differs from the 550XGL card (both are > > > Quadro4-based). There is no good (detailed) info on these cards > > > capabilities - in particular the options for driving > > mix-and-match LCD+CRT, > > > CRT+CRT, LCD+LCD is not well defined. I think the 550XGL is > > clear enough > > > that it can either do CRT+CRT or LCD+LCD, no mixing. > > > > Take a look at this new Matrox video card. > > http://firingsquad.gamers.com/hardware/parhelia/ > > http://firingsquad.gamers.com/hardware/parheliapreview/ > > > > I've seen a prototype (friends at matrox, the R&D > > headquarters is 5 minutes from my house), but not on 1 of my > > monitors. The > > video is significantly better, maybe 3 times better than anything > > I've seen to date. I did scope the analog out from the VGA > > adapter, and I must say that it clearly kicks ass compared to > > anything I've seen to date. If it was at my office, I would have > > provided a scope shot from my TDS3054 5GS/s scope with > > differential buffered probes, but you may have to wait a month or > > 2 for that. > > (The true 30 bit video kicks ass, and no silly r-g-b channel > > cornstalk like all NVIDIA cards, which only have 42db r-g-b channel > > isolation). > > > > Only flaw, you can only go up to 3 monitors instead of 4. > > > > ____________ > > Brian Guralnick > > [EMAIL PROTECTED] > > > > > Do you know how the 200 NVS differs from the 550XGL card (both are > > > Quadro4-based). There is no good (detailed) info on these cards > > > capabilities - in particular the options for driving > > mix-and-match LCD+CRT, > > > CRT+CRT, LCD+LCD is not well defined. I think the 550XGL is > > clear enough > > > that it can either do CRT+CRT or LCD+LCD, no mixing. > > > > > > Your $145 will probably cost about $200 to $300 here (not including > > > exchange rates) as they are considered specials no volume or discount > > > houses are doing them in this country. > > > > > > BTW the Mitsubishi 2040u is EOL'ed. The new one is 2060u. Any > > > comments? This will cost me about $1900AUD - or about $1060USD > > on current > > > exchange rates. How does that compare to street pricing in nth America? > > > > > > For comparison an 17" LCD from Mitsubishi (DV170) is $1700AUD or about > > > $950USD. How does that compare? And this is an analog drive > > LCD not even DVI! > > > > > > Thanks for the advice, > > > Ian > > > > > > > > > ************************************************************************ > > > * Tracking #: 26E2845541811A4EB15939F1168E841994AF2087 > > > * > > > ************************************************************************ > > > > > > > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > * To post a message: mailto:[EMAIL PROTECTED] > * > * To leave this list visit: > * http://www.techservinc.com/protelusers/leave.html > * > * Contact the list manager: > * mailto:[EMAIL PROTECTED] > * > * Forum Guidelines Rules: > * http://www.techservinc.com/protelusers/forumrules.html > * > * Browse or Search previous postings: > * http://www.mail-archive.com/[email protected] > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
