Hi Group, In the past I have always created a separate Specification document to specify copper and substrate thicknesses, color of overlay etc. but most of this information is in 99SE. Does anyone know whether it can be extracted? Particularly the layer stackup information, I do not want to duplicate this and risk the 2 sources being different.
I know some designers put this information on one of the drafting layers of the PCB itself. To Protel: Please put in all the other information like overlay color so we can make a really thorough report. I would also like to be able to specify the starting copper thickness so I know what the Cu thickness in the vias is (this is often important on power supply designs). Cheers, Hugh. ************************************************************************ * Tracking #: 17E775AFB476AF4DB5D1DA9722D0794CFB0A34FF * ************************************************************************ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
