Personally, I don't mind seeing questions about DXP on this list. It's good to know what the issues are with DXP, because it gives insight as to how mature (or immature) DXP is, and if it's worth upgrading to. I can't answer any DXP questions because I don't have it, but I at least want to know of what others are suffering (or triumphing) through.
That also goes for older versions: 98, 3.X, 2.X, Autotrax, etc. All Protel is fair game here, IMO. And conversion issues (Orcad, PADS, etc.) too. Best regards, Ivan Baggett Bagotronix Inc. website: www.bagotronix.com ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Wednesday, July 09, 2003 8:56 AM Subject: Re: [PEDA] Protel EDA Forum... was adjacent component placement D XP > > Mr Morgan, > > Since when is this the "Protel 99SE" list? > > For your future information, this is the Protel EDA Forum, as clearly and > explicity stated in the footer appended to each and every list message, and > kindly maintained by Techserv, Inc for the quasi-public dissemination of > issues related to any and all versions of Protel EDA software, including, > but not limited to P99SE...AND DXP. > > I think I speak for a portion of this list (though clearly not all) when I > say that I would appreciate it if you would attempt to remember this before > spouting off erroneous garbage like the bull sheisa you post below. In any > case, I speak for myself. > > Finally, I want to be clear to Dr Roberts that this is not the exclusive > territory of P99SE users, and Dr Roberts is welcome to post queries or > otherwise participate in this forum as she likes. > > As Jason indicated, there is another forum, sponsored by Altium, which is > dedicated to DXP, but I feel the need to attempt to un-obfuscate the > distinction between these forums. Altium's is one which is a quarantined, > corporate sponsored list, with all of the implications that go with that > status. Techserv's is an open user's forum for ANY and ALL Protel EDA > products, regardless of any ignornat comments made by it's novice or jaded > participants. > > thank you, > > Andrew Jenkins > > > -----Original Message----- > > From: Jason Morgan [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, July 09, 2003 4:46 AM > > To: 'Protel EDA Forum' > > > > Firstly you posted to the wrong list, this list is for Protel > > 99se, and not > > DXP, > > there is a separate list for DXP issues, see > > http://forums.altium.com/cgi-bin/msgbylist.asp?list=dxp * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
