Hi, did anyone notice the following bug in 99SE? I'm referring to SP6.
When you draw a PCB outline from the scratch and then call the "update PCB" function in the corresponding schematic, in order to import your parts and nets into the PCB file, the synchronizer places the parts on the right side of the board outline; same parts horizontally, different parts vertically. If you have many different parts, i.e. the vertical column of components is high, some can be placed outside the reachable workspace (area on the screen reachable by move in/out and the scroll bars). If you do not notice this directly, you will notice that in every "update PCB" iteration you do when you change something in the schematic, the synchronizer adds a number of components and lots of nets that he had added before, but seems to have "forgotten", as these components are invisibly and unreachable placed vertically outside the working place. You can bring them to the working place, if you know what is missing, by using the "Move Component" function. This brings them "back". Very weird behaviour! Mit freundlichem Gruß Kind regards Gisbert Auge N.A.T. GmbH www.nateurope.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
