thanks i'll look at that ds
Darren wrote: > > Hi Dennis, > > Looks like the bit that selects that is in the > 4th line as shown below, this is an ASCII version > of the file. 17800000 is the stack bit checked > and 17200000 is unchecked, you might be able to > do a change in a text editor, but that would > depend on what other bits might be set also. > > ENDCOMP > DEFAULTS > 0 0 > 9000000 17200000 > 1 > 1 1 1 > > ENDCOMP > DEFAULTS > 0 0 > 9000000 17800000 > 1 > 1 1 1 > > Not sure what the problem is with the double click > looks like the component area has a problem, save > to ASCII might fix that also. Just tried opening > a ex-dxp file from 2004 and the pad stack enable > is checked.. :( > > Regards, > Darren Moore > > > -----Original Message----- > > From: Dennis Saputelli [mailto:[EMAIL PROTECTED] > > > > > > we are working on a board which is a substantial variant of a board > > which was done in DXP (not in P2004) by someone else > > > > my working file was saved back to 99SE which is what we are using > > > > i notice a few anomalies and wonder if there is any comment > > > > some, but not all, components cannot be dbl clicked to edit > > > > later we discovered that dbl clicking somewhere nearby but not > > particularly close to the component made the edit function work > > what is up with that ? > > > > another thing > > it seems that the pads of all components all have the 'enable > > padstack' > > enabled > > and of course that is not one of the properties available as a global > > edit in 99SE > > > > does the save back to 99SE always make 'use padstack' enabled > > because it > > is the norm in DXP? > > i am not sure this is a problem but it was at least a curiosity for me > > > > Dennis Saputelli > > > > -- > > ______________________________________________________________ > > _________ > > Integrated Controls, Inc. Tel: 415-647-0480 EXT 107 > > 2851 21st Street Fax: 415-647-3003 > > San Francisco, CA 94110 www.integratedcontrolsinc.com -- _______________________________________________________________________ Integrated Controls, Inc. Tel: 415-647-0480 EXT 107 2851 21st Street Fax: 415-647-3003 San Francisco, CA 94110 www.integratedcontrolsinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
