On Sun, 2002-12-01 at 16:20, dana christiansen wrote:
> Hi again,
>
> I'm trying to set up a dual head system in redhat 8.0. I have an MSI
> G4MX440 with two video outs. I've read up a lot more on Xinerama but i
> can't find libs in redhat 8.0. I'm pretty sure that psyche doesn't ship
> with it in its xfree86.
Works fine for me with my Radeon 7500. My config below. Note Xinerama is
disabled at the moment.
# File generated by anaconda.
#
Section "ServerLayout"
#
Identifier "Anaconda Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" LeftOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
# Option "Xinerama" "On"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "dri"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
# Option "AutoRepeat" "500 5"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Option "Protocol" "Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
#Option "XkbOptions" ""
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us" #Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Viewsonic"
ModelName "PS790"
HorizSync 30.0 - 95.0
VertRefresh 50.0 - 180.0
Option "dpms"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Viewsonic"
ModelName "PS790"
HorizSync 30.0 - 95.0
VertRefresh 50.0 - 180.0
Option "dpms"
EndSection
Section "Device"
# Some 7500 boards aparently need this option enabled to work - bug
(#62760)
# Option "CrtScreen"
Identifier "ATI Radeon 7500"
Driver "radeon"
VendorName "ATI Radeon 7500"
BoardName "ATI Radeon 7500"
BusID "PCI:1:0:0"
Option "AGPMode" "4"
Screen 0
EndSection
Section "Device"
# Some 7500 boards aparently need this option enabled to work - bug
(#62760)
# Option "CrtScreen"
Identifier "ATI Radeon 7500/2"
Driver "radeon"
VendorName "ATI Radeon 7500"
BoardName "ATI Radeon 7500"
BusID "PCI:1:0:0"
Option "AGPMode" "4"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "ATI Radeon 7500"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "ATI Radeon 7500/2"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Regards,
Jim H
--
Psyche-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/psyche-list
