I responded before having read your reply. Yeah, in Avid's instructions, they say to install the drivers before launching Pro Tools for the first time or something like that. I guess there's an extra step after the fact. Good to know for future reference.
Cheers On Aug 1, 2011, at 5:51 PM, J. R. Westmoreland wrote: > Slau, > > As I mentioned I actually had to do the "I" key while at the splash screen > to re-init the i/o devices. I first tried everything you mentioned and it > still didn't work so after a call to tech support that is what they told me > to do. > As I understood it if you installed the driver before starting PT for the > first time it usually worked. Otherwise, you had to add the other step. > > Best, > J. R. > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf > Of Slau Halatyn > Sent: Monday, August 01, 2011 1:14 PM > To: [email protected] > Subject: Re: Problems with PT 9 and MBox II > > Hi Abdul, > > You need to install the driver for the MBox. Before Avid opened up Pro Tools > to different interfaces, it was all very automatic but now one needs to > install the proper driver/drivers for the corresponding interface. In > version 8, you had it all set up automatically but in version 9 you have to > take that extra step. > > The reason you're getting the signal out of your laptop is because, if an > interface isn't detected (because of a missing driver), Pro Tools will > automatically create an aggregate device which includes core Audio devices > like your built-in microphone, line input and built-in speakers. > > Once you've installed the MBox driver, you'll probably have to go into the > Playback engine setup window and select the MBox as the audio engine. Pro > tools will automatically save your settings and it should just work. If, for > some reason you still don't get anything after making this change, just > restart your computer and it should work fine. > > HTH, > > Slau > >
