Hi Naama, Absolutely, you'll need either Snow Leopard or Lion for now. Also, Pro Tools 9 would be recommended. Anything higher than 8.0.4 is fine but, if at all possible, try to stay away from version 10. If it has to be 10, then that's workable too.
slau On Aug 22, 2012, at 12:38 AM, Naama Samantha Shang wrote: > Hi Slau, > So I just want to make sure I'm clear - as soon as my work machine arrives, > do I downgrade to Lion before anything else, to avoid problems? > Thanks, > Naama > > > -- > Naama Samantha Shang > Audio Technician > Talking Book Library > Natanya, Israel > +972-9-861-7110 > na...@clfb.org.il > > -------------------------------------------------- > From: "Slau Halatyn" <slauhala...@gmail.com> > Sent: Tuesday, August 21, 2012 6:51 PM > To: <ptaccess@googlegroups.com> > Subject: Re: Pro Tools 10 and Mountain Lion > >> No sarcasm at all. I just didn't want to misunderstand anything since I >> currently don't use Mountain Lion. The vagaries of communication lead to >> misunderstandings and I just needed to absolutely sure that at least one >> person was categorically unable to read the start field with PT 10 under >> Mountain Lion. >> >> Cheers, >> >> Slau >> >> On Aug 21, 2012, at 11:11 AM, Chris Norman wrote: >> >>> Haha, not sure if that was sarcasm or not, but no worries anyways. >>> >>> >>> On 21/08/2012, Slau Halatyn <slauhala...@gmail.com> wrote: >>>> OK, thanks for confirming that in no uncertain terms. >>>> >>>> Cheers >>>> >>>> On Aug 20, 2012, at 10:44 PM, Chris Norman wrote: >>>> >>>>> OK, lemme try and lay this out as clearly and fully as I know it. >>>>> >>>>> I can't try pt 9 on Mountain Lion, or I would, but with PT10: >>>>> >>>>> In the edit window, when you interact with the counter display, none >>>>> of the values there will read. That is to say, the start, current, and >>>>> end selection boxes. They just say text or something like that. >>>>> >>>>> As people have said, the same is true of the edit boxes in the tempo >>>>> settings, and I'd bet it's the same in the time signature >>>>> configuration thingy too. >>>>> >>>>> I'd be willing to put money on it being the text fields that Avid use, >>>>> that require you to use the numberpad to enter data. >>>>> >>>>> Other than that, everything else is working healthily, hardware, etc, etc, >>>>> etc. >>>>> >>>>> Cheers, and hope that clears it up a bit Slau. If you need to know >>>>> anything else, please let me know. >>>>> >>>>> Cheers, >>>>> >>>>> On 20/08/2012, The Oreo Monster <monkeypushe...@gmail.com> wrote: >>>>>> Hello, >>>>>> >>>>>> You can also try going to the events menu and tempo and constant tempo, >>>>>> you >>>>>> see it does the same thing there. Infact you will notice it does the same >>>>>> in >>>>>> all edit fields in all of the different event dialog boxes. >>>>>> The Oreo Monster >>>>>> monkeypushe...@gmail.com >>>>>> >>>>>> >>>>>> >>>>>> On Aug 20, 2012, at 4:01 PM, "J. R. Westmoreland" <j...@jrw.org> wrote: >>>>>> >>>>>>> Interact with the counters area and there are several there. >>>>>>> >>>>>>> >>>>>>> -----Original Message----- >>>>>>> From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On >>>>>>> Behalf >>>>>>> Of Nick Gawronski >>>>>>> Sent: Monday, August 20, 2012 1:59 PM >>>>>>> To: ptaccess@googlegroups.com >>>>>>> Subject: Re: Pro Tools 10 and Mountain Lion >>>>>>> >>>>>>> Hi, Where should I go in pro tools to see if these fields work as I am >>>>>>> still >>>>>>> in the process of learning pro tools? I should be able to let you know >>>>>>> if >>>>>>> the proper fields read if I am told where to go and I will also try it >>>>>>> on >>>>>>> my >>>>>>> lion installation to see the difference. Nick Gawronski >>>>>>> >>>>>>> On 8/19/2012 6:41 PM, Slau Halatyn wrote: >>>>>>>> Nick, >>>>>>>> >>>>>>>> Can you read the Start field in the edit window under Mountain Lion in >>>>>>>> Pro >>>>>>> Tools 10? >>>>>>>> >>>>>>>> Slau >>>>>>>> >>>>>>>> On Aug 19, 2012, at 6:57 PM, Nick Gawronski wrote: >>>>>>>> >>>>>>>>> Hi, Some edit fields read fine like the file names to save projects >>>>>>>>> as and when you bounce tracks to files. I am using mountain lion but >>>>>>>>> do have lion still around should I need it. I think it is possible >>>>>>>>> to down grade to lion if you need to but don't know if the newer mac >>>>>>>>> books will support the down grade. My digi 003 works fine under >>>>>>>>> mountain lion and I did not need to reinstall anything. The only >>>>>>>>> thing I had to reinstall was the drivers for my express card for my >>>>>>>>> sata drive and that was not even an upgrade I just opened the folder >>>>>>>>> where I had the pkg file and ran it and things now work great again. >>>>>>>>> Nick Gawronski >>>>>>>>> >>>>>>>>> On 8/18/2012 10:15 PM, Slau Halatyn wrote: >>>>>>>>>> So, am I understanding this correctly? With Mountain Lion, no edit >>>>>>> fields are being read in Pro Tools versions 9 and 10? Can someone else >>>>>>> confirm this? Version 10 reads fine with Snow Leopard and Lion, from >>>>>>> other >>>>>>> accounts. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Aug 18, 2012, at 10:07 PM, The Oreo Monster wrote: >>>>>>>>>> >>>>>>>>>>> Hello, >>>>>>>>>>> >>>>>>>>>>> It appears to be an edit field where there would be text you could >>>>>>>>>>> edit >>>>>>> or change thats not reading in ML with PT10. This issue doesn't happen >>>>>>> with >>>>>>> PT 9 or 10 on lion. And if i remember correctly PT 9 on ML had the same >>>>>>> issue. As i was planning to keep my air running PT 9 in case i ran into >>>>>>> any >>>>>>> showstoppers in version 10. But when i upgraded my air to ml i >>>>>>> realiezed >>>>>>> none of the edit fields read at all. That was when i upgraded to >>>>>>> version >>>>>>> 10 >>>>>>> on ML to se if it would fix the issue. So if appears for now If pro >>>>>>> tools >>>>>>> is >>>>>>> an everyday necessity at the very least you will need to keep a lion >>>>>>> partition around for a little bit. >>>>>>>>>>> The Oreo Monster >>>>>>>>>>> monkeypushe...@gmail.com >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Aug 16, 2012, at 8:50 PM, Slau Halatyn <slauhala...@gmail.com> >>>>>>> wrote: >>>>>>>>>>> >>>>>>>>>>>> I still haven't updated my HD system to version 10 but, since I >>>>>>>>>>>> also >>>>>>> have a 003, I decided to update my regular LE version to 10. I'd like >>>>>>> to >>>>>>> clear something up and I will need verification of something: >>>>>>>>>>>> >>>>>>>>>>>> I'm running Pro Tools version 10 on Snow Leopard and there are no >>>>>>> issues with any counter displays not reading. Now, I don't have >>>>>>> Mountain >>>>>>> Lion and will not run it for some time. Can someone verify, >>>>>>> specifically, >>>>>>> where counters are not reading properly? Even in Mountain Lion, that >>>>>>> would >>>>>>> be fairly strange, that is, for a text display to not read correctly. >>>>>>> That >>>>>>> said, technically, Mountain Lion is not approved for Pro Tools so I'm >>>>>>> not >>>>>>> concerned.yet. >>>>>>>>>>>> >>>>>>>>>>>> Again, someone with Mountain Lion and Pro Tools 10, please let me >>>>>>>>>>>> know >>>>>>> precisely where a counter display doesn't read correctly where it used >>>>>>> to >>>>>>> read correctly in Snow Leopard or Lion. >>>>>>>>>>>> >>>>>>>>>>>> Thanks, >>>>>>>>>>>> >>>>>>>>>>>> Slau >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> -- >>>>> Take care, >>>>> >>>>> Chris Norman. >>>>> >>>>> <!-- chris.norm...@googlemail.com --> >>>> >>>> >>> >>> >>> -- >>> Take care, >>> >>> Chris Norman. >>> >>> <!-- chris.norm...@googlemail.com -->
