I definitely agree the lyrics need to be louder. Aside from that, though,
this is awesome! Great job!
Chris.
----- Original Message -----
From: "byron harden" <sticomu...@gmail.com>
To: <ptaccess@googlegroups.com>
Sent: Monday, September 16, 2013 8:16 PM
Subject: Re: One of my first mixes in PT
i think its pretty cool.
just a little more vocals,
about 3DB worth.
little less kick and bass.
i know that would take it to the next level.
this sounds nice ,
there is a lot more that could be done to it.
but if this is your first mix,
it sounds like a great start.
keep
On Sep 16, 2013, at 5:17 PM, matt diemert <mcdiem...@gmail.com> wrote:
Just thought I'd throw this out there for some ideas on what could be
better ETC.
If you're offended by hymns you may not want to listen other wise, I'd
appreciate any comments.
I played much of this obviously recorded and mixed in PT 10
http://www.soundclick.com/player/single_player.cfm?songid=12499545&q=hi
On 9/16/13, Poppa Bear <heavens4r...@gmail.com> wrote:
Your fine, I'm glad you pointed it out, I wouldn't want to be thinking
I'm
giving somebody a good deal and they could get it for almost a hundred
or
more less right on Ebay. Thems the breaks.
----- Original Message -----
From: "Matt Diemert" <mcdiem...@gmail.com>
To: <ptaccess@googlegroups.com>
Sent: Monday, September 16, 2013 8:40 AM
Subject: Re: good remote control surfaces
Papa, sorry of my tone seemed accusatory, that certainly wasn't my
point! I
was simply pointing out that over the last three months or so, all the
options that I have been in on ended somewhere between 250 and $325.
Anything above that seems not to really sell.
Sent from my iPhone
On Sep 16, 2013, at 12:08 PM, "Poppa Bear" <heavens4r...@gmail.com>
wrote:
Hello Matt, at first I was a little put out about what you said, but I
went and checked them out on Ebay and they are much lower than they
were
just a year ago. If somebody on here wanted to pick it up I would go
down
to $300. Keep in mind, many of the lower $200 and under are the 002
rack.
I did see a 002 rack with the black lion mod which was only about $450
or
so, and that is a good deal, but it is not really considered portable.
Take care
----- Original Message ----- From: "Matt Diemert" <mcdiem...@gmail.com>
To: <ptaccess@googlegroups.com>
Cc: <ptaccess@googlegroups.com>
Sent: Monday, September 16, 2013 2:57 AM
Subject: Re: good remote control surfaces
400 is probably a bit high by say eBay standards. Though many are
listed
in this range the ones that actually sell are closer to the $250 $325
range. I've been in on several auctions for a 002 over the last month
and
this is what I've experienced.
Sent from my iPhone
On Sep 16, 2013, at 12:03 AM, Scott Chesworth
<scottcheswo...@gmail.com>
wrote:
Only downside to the 002 is no scrub wheel. However, assuming used
gear goes for roughly the same value in the sates as it does here in
the UK, that's a good price for one.
On 9/16/13, TheOreoMonster <monkeypushe...@gmail.com> wrote:
I believe it was discontinued for the 003, but as it was said, a lot
of
people/places still use the 002.
On Sep 15, 2013, at 10:29 PM, "Poppa Bear" <heavens4r...@gmail.com>
wrote:
Nope, but I know small project studios that are still using them
with
no
problems. My partner and I both had one in our control room, he is
still
using his.
----- Original Message ----- From: "Jed Barton" <j...@jedbarton.com>
To: <ptaccess@googlegroups.com>
Sent: Sunday, September 15, 2013 6:24 PM
Subject: RE: good remote control surfaces
Oh wow,
Do they still make this surface new?
-----Original Message-----
From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com]
On
Behalf
Of Poppa Bear
Sent: Sunday, September 15, 2013 10:16 PM
To: ptaccess@googlegroups.com
Subject: Re: good remote control surfaces
I still have a Degidesign 002 that I will let go for $400. It is
in
very
good condition, still have the packaging.
----- Original Message -----
From: "TheOreoMonster" <monkeypushe...@gmail.com>
To: <ptaccess@googlegroups.com>
Sent: Sunday, September 15, 2013 5:47 PM
Subject: Re: good remote control surfaces
if you want one that doubles as a control surface, the 003 is
probably
a good place to start. Otherwise, if you are in the states, you
may
want to contact a store like www.sweetwater.com and talk to a
sales
engineer who can help you decide on something.
On Sep 14, 2013, at 8:29 AM, Jed Barton <j...@jedbarton.com>
wrote:
Hey guys,
Alright, I am about to make the jump to buy protools, but before
I
do
I need a suggestion for a remote control surface. I know there
are
so many out there.
Having one with a scrub wheel would be extremely helpful.
Any ideas?
Thanks,
Jed
--
You received this message because you are subscribed to the
Google
Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from
it,
send an email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit
https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the
Google
Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it,
send
an email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the Google
Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it,
send
an
email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the Google
Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it,
send an
email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the Google
Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it,
send
an
email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the Google
Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it,
send
an
email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the Google
Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it,
send
an email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the Google
Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send
an
email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the Google
Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send
an
email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the Google
Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send
an
email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the Google
Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send
an
email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
Warm Regards:
Matt Diemert
330-980-0046
--
You received this message because you are subscribed to the Google Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the Google Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the Google Groups "Pro Tools
Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.