Steve I added a USB hub and mouse because the power of my laptop is great. It worked well for me for around 30 bucks.g
Ricky Prevatte LMBT1154 > On Feb 2, 2015, at 4:23 AM, Steve Sparrow <i...@sparrowsound.com.au> wrote: > > coming in from the left hand side on to the bottom left hand corner of the > track pad seems to work for me every time. No problem. This is due to a bit > of sighted assistance from my wife Karen. She saw what was going on with the > cursor. , so we sussed it out over a few minutes. > > how ever, i will change to a desk top mac at some stage very soon and have a > proper mouse. I’m sure it will be easier that way. > Steve > >> On 1 Feb 2015, at 11:57 pm, Ricky Prevatte <rickypreva...@gmail.com> wrote: >> >> I used the proper mouse. I will also try your suggestion Steve and go in >> from the left with the trackpad. But the voice over command did not work for >> me ever. >> >> Ricky Prevatte LMBT1154 >> >>> On Feb 1, 2015, at 1:36 AM, TheOreoMonster <monkeypushe...@gmail.com> wrote: >>> >>> Macs don’t have a left and right click like PC’s do. all you have to do is >>> hold down the modifier key and click on the track pad. You right click on >>> most stuff on the mac by holding down CMD while clicking the mouse or >>> trackpad. >>> >>> >>>> On Jan 31, 2015, at 9:52 PM, Steve Sparrow <i...@sparrowsound.com.au> >>>> wrote: >>>> >>>> Hi Poppa. actually i managed to get solo safe happening. Turns out what i >>>> was doing was running my finger along the bottom of the track pad, >>>> locating the left mouse button, and what i did not realise was that this >>>> was moving the cursor. So i changed the way i do this, come in from the >>>> left hand side. >>>> it’s working fine now. >>>> Thanks >>>> Steve >>>> >>>>> On 1 Feb 2015, at 12:45 pm, Poppa Bear <heavens4r...@gmail.com> wrote: >>>>> >>>>> You found out that you needed to solo safe your busses and sends? PS, >>>>> what steps are you taking to click on solo safe? I tend to have to try a >>>>> few different key combonations until I get it right each time and it's a >>>>> PEDA. >>>>> >>>>> -----Original Message----- >>>>> From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On >>>>> Behalf Of Steve Sparrow >>>>> Sent: Saturday, January 31, 2015 1:00 PM >>>>> To: ptaccess@googlegroups.com >>>>> Subject: solo safe >>>>> >>>>> Hi. well i’m setting up a mix in p t. a couple of things i thought i’d >>>>> ask about. IHaving a small issue when soloing tracks. >>>>> i’m trying to sub mix some tracks. So i created an augs track, and then >>>>> signed it to a bus . i then sent the tracks i wanted to my augs track. >>>>> all fine. >>>>> >>>>> now. from this point on, when ever i hit a solo on any track i get no >>>>> signal at all, i don’t get what i am soloing. as i said this is the case >>>>> with any track i try to solo. It works fine before i sign my guitars to >>>>> the augs track. >>>>> >>>>> Is this something to do with solo safe. I have also tried to set this >>>>> up, but can’t seem to click my mouse. i find my solo button on the >>>>> desired track, hit vo command f 5, thin hit command and what i think is >>>>> the left mouse button. but nothing seems to happen. i am using the track >>>>> pad on a mac book pro at the moment. does it work with a track pad, or do >>>>> i need a proper mouse with buttons. . >>>>> i am hitting the bottom left hand corner of my trak pad. >>>>> Is this also the reason for my solo issue. >>>>> Steve >>>>> >>>>> p.s. cursure tracking is on. >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google Groups >>>>> "Pro Tools Accessibility" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google Groups >>>>> "Pro Tools Accessibility" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>> For more options, visit https://groups.google.com/d/optout. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to ptaccess+unsubscr...@googlegroups.com. >>>> For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
